Milwaukee EC59 Operation & User’s Manual

immediately. To replace the batteries unscrew the battery compartment cap and replace all four 1.5 V batteries while paying attention to their polarity. Make sure the gasket is in place before screwing back the cap. Batteries should only be replaced in a non- hazardous area using the battery type specified in this ...

indicator 2. Instability indicator 3. Percent indicator 4. Calibration indicator 5. Low battery indicator 6. Measuring unit on main LCD 7. Main LCD 8. Temperature reading 9. Secondary LCD OPERATIONAL GUIDE y Remove the probe cap and turn the meter on by pressing the ON/OFF/CAL button. All the used segm ...