Omniflex Maxiflex P3 Installation Manual

Data subject to change without notice © Copyright OMNIFLEX IGM1260FR02 Part Number 8.0101.036 INSTALLATION GUIDE Maxiflex P3 CPU M1260F Introduction This Installation Guide is intended to aid the fitment of the M1260F CPU in the field. For opera ...

Data subject to change without notice © Copyright OMNIFLEX IGM1260FR02 Part Number 8.0101.036 Software Requirements Omniset is the PC utility that is used to configure the unit. Cofiguring the Realtime Clock(RTC) 1. Assemble the Maxiflex base as s ...

Data subject to change without notice © Copyright OMNIFLEX IGM1260FR02 Part Number 8.0101.036 8 1 2 3 4 5 6 7 ON 8 1 2 3 4 5 6 7 ON Table 2: Programming Port Pinout Signal Name DB-9 FCC-68 Pin No. Rx Data from P3 2 4 Tx Data to P3 3 1 Ground Refer ...

Data subject to change without notice © Copyright OMNIFLEX IGM1260FR02 Part Number 8.0101.036 Pin number Communication Standard RS232 RS485 1 Do not connect Rx Data + (In) 2 Rx Data (In) Rx Data – (In) 3 Tx Data (Out) Do not connect 4 Do not con ...