EchoStar DSB-800 2Ci Operation & User’s Manual

4. Remote Control Unit (RCU) ------------------------------------------------------- 6 5. Getting started ------------------------------------------------------------------------ 7 6. Operation and menu program - ----------------------------------------------------9 7. Specifications ----------------------------------------------------------------------- 20 3. Front & Rear ...

Unplug the receiver from the AC power outlet before cleaning. Use only a damp cloth for cleaning the exterior of the receiver. Do not use accessories or attachments not recommended by the receiver manufacturer, as they may cause hazards and will void the warranty. Do not operate the receiver in high-humidity areas, neither expose it to water or m ...

2. MPEG-1 Audio Layer 1& 2 3. MPEG-2 Digital & fully DVB compliant 4. Capable of interfacing the CAMs of DVB Common Interface standard 5. Capable of auto scanning (between 950MHz and 2150MHz) the frequency for SMATV-IF system 6. Plug & Play self-installing program set-up 7. On-screen display with 256-color full resolution 8. LD quality video, CD quality audio 9. RS232C port for additional information ...

Rear Panel Rear Panel 4 Note: All the cables used for Input/Output connection for the receiver should be well shielded. Note: All the cables used for Input/Output connection for the receiver should be well shielded. 2 Slots for CI modules and the smart cards ON/Standby Channel up / down AC power cord LNB input Antenna input RF output connector to TV ...

To watch payable program channels, a CI module and a smart card from the service provider are necessary. The service provider is the distributor of the programs. CI modules and smart cards are only licensed to service providers and they are distributed by their dealers or agents. If you are subscribed to the services of more than one service provider, you might have to insert or change smart cards and CI module before being able to ...

The MUTE key switches the sound on and off. The EXIT key exits to the video viewing mode at any time. The MENU key is used to display the main menu or to return to the A/V output. The Volume and Channel keys control the two most frequent ly used functions of the receiver. The cursor keys are for channel and and volume and . The OK key is used to select a program, a highlighted line or para ...

DO NOT PLUG the receiver into Main Power Outlet, until you complete all the connections to the receiver. 5. Getting Started 7 Receiver to TV with RF Receiver to VCR and then to TV with RF 1.Connect the Off-air TV antenna or cable if available to the ANT IN socket of the EchoStar DSB-800 2CI. 2. Connect the TV OUT socket of the EchoStar DSB-800 2CI to th ...

1. Connect the Off-air TV antenna or cable if available to the ANT IN socket of the EchoStar DSB-800 2CI. 2. Connect the TV Out socket of the EchoStar DSB-800 2CI with the RF IN of the TV set. 3. Connect the Video and Audio RCAs of the EchoStar DSB-800 2CI to the Video and Audio RCAs of the TV set. TV ANTENNA TV RF IN VIDEO AUDIO IN IN Receiver to TV with SCART Cables 1. Connect the Off-air TV antenna or cab ...

LNB Frq. High 5150 DiSEqC DiSEqC 1..4 DiSEqC Port 1 Polarity Control 13/18V LNB Freq. Band Control 0/22kHz LNB Type Index (1..8) 0/22kHz Control ...

Language Setting User’s Setting Local Time Setting A/V Output Setting About EchoStar Language Setting 3 1 4 2 Exit i Language Setting Menu Language Main Audio Language English ? English ? 1 2 2nd Audio Language English Subtitle Language English 3 4 Exit i Subtitle None E ...

About EchoStar Please select your TV format. 4:3 for normal screen TV 16:9 for wide screen TV Aspect 11 Here you can find the information about our co mpany. If you have any questions about the EchoStar DSB-800 2CI, first contact your local dealer. Banner ? You can select the type of Video standard by using the keys. ? Select a vacant channel considering your local channels and preset channels below. * Pre-set : Ch 38 ...

LNB Type Type1 TP/Polar 11478/H Symbol Rate 30000 Position Step Move E W Search type Auto Search Start Search(Press ...

2CI searches for all available channels (Radio and TV) on the currently selected satellite. The names of the fo und TV channels are shown on the left and the total n umber of found TV and Radio channels are mentioned on the right. Auto Search SMATV Configuration 13 SMATV Configuration Symbol rate alternative 2 27500 Symbol rate alternative 3 27500 FEC ...

Blues F Classic rock F Soft Rock F 2 3 Generation ROC F Love Songs F Dance F Radio Evira ...

code to enter directly into the “Installation” and “Edit menu”. Installation&Edit Lock TV Channel Lock TV Channel Lock Voyage Contact TV LC I Canal J Paris Premere 1 2 4 3 5 6 8 7 DF 1 Info-Kanal Star Kino CNN Lock Unlock Exit i If Receiver Lock is [ON], you have to enter the ...

Hit Liste Blues Classic Rock Soft Rock 2 3 4 ASIASAT2 Generation ROC Love Songs Dance REE 5 7 6 8 Delete Cancel Move Favorite Exit i 1 TP/Pol/SR 3640/H/27850 16 Edit Radio Channel Use the same procedure for the Radio Channels as desc ribed for editing the TV Channels above. Edit Satellite To delete a transponder, press the Red key after selectin g the transponder you want to delete. T ...

RAI2 No Information No Time RAI3 Rai Sport Cavale ? 11:27~ 12:02 RAIwidescree Wide Screen 11:00~ 14:00 2 3 4 Radio Next Info Weekly Exit i 1 5 6 7 11: 52 Now RAISPORT sate Rai Sport Sat 11:00~ 14:00 TEST2RAI No Information No Time TEST ...

TP/Signal Quality 0 LNB polarization Vertical Symbol Rate 0 Channel Name ???????? FEC AUTO Digital TV channels 3 ...

he numeric keys. Press the OK key to save the newly edited frequency. 19 Edit LNB Local Frequency Edit LNB Local Frequency LNB Local Freq. 0..9 ? 11300 ? Exit i If you want to reset all the data edited, press the Red bu tton twice. Reset (Factory Default) Reset (Factory Default) * If you want Factory Reset, press Red button Reset Ca ...