NONLINEAR LABS C15 Manual 

C15 Studio Package - Manual Addendum Introduction In the development of the C15 we first focused on human control and playability. We designed a self-contained instrument "for those who love to play keys". The implementation of a MIDI interface is now widening up the spectrum of applications for the C15 - especially in the studio enviro ...

component. When a Split Sound is loaded, Notes can be received and sent on both Parts, using the secondary (Split) Channel setting. The eight Hardware Sources Physical control elements of the C15 like a pedal or the bender are called Hardware Sources. They can be flexibly mapp ...

The C15 has a Type A connector for USB, and its embedded computer system works as a "USB host" for "USB devices" connected to this port. This means that you only need a standard USB cable to set up a MIDI communication with an instrument, a hardware sequencer, or a MIDI interface that has a USB Type B connector. Please note ...

A computer running a DAW or similar is the center of many setups. It functions as a USB host and can only be connected to USB devices. Since the C15 is also a USB host we provide the "MIDI Bridge" that functions as a double-sided USB device with two Type B connectors. One of the ports is connected to the C15 and the second to ...

In the Setup you find a new page for "Midi Settings". It is divided into the sections "Receive", "Send", "Local", and "Mappings". 5 ...

it is the channel for Part I, and when "Split Channel Part II" is set to "Common" it will be used also for Part II. If you select "Omni", messages from all 16 MIDI channels will be applied. "None" will block all incoming MIDI messages, except in Spl ...

When set to "Off", the eight Hardware Sources will not be controlled by MIDI Control Change, Pitchbend or Aftertouch messages. Send Channel: Here you can select the MIDI channel that is used to send MIDI messages. With Split Sounds it is the channel for Part I, and when "Split Channel (Part II)" is set to "Common" it will be used als ...

used to send MIDI note messages. Enable Hardware Sources: When set to "Off" the eight Hardware Sources are disconnected from the synth engine but still can be used to send MIDI Control Change, Pitchbend or Channel Pressure messages. (In this mode t ...

Hardware Sources. High Resolution options for Velocities and Hardware Sources as well as a Bank selector for Program Changes are also provided. The Mappings apply to both MIDI Send and MIDI Receive. 10 ...