Nokia RH-77 Manual
Read Online
Read the Nokia RH-77 Manual online using the built-in PDF viewer.
RH-77 Manual : Key Pages of Document
2118 (RH-77) Mobile Terminal Issue 01 04/2005 Company Confidential ©2005 Nokia Corporation Service Tools ...
Page 2 ©2005 Nokia Corporation Company Confidential Issue 01 04/2005 Contents Page Model 2118 Service Tools ............................................................................................................................ 3 AAS-10A RF Probe ......................................................................................................................................3 CA-22DS Flash Cable ..................................................................................................................................3 CA-25RS RF Test Cable .............................................. ...
Service Tools 2118 (RH-77) Issue 01 04/2005 ©2005 Nokia Corporation Company Confidential Page 3 Model 2118 Service Tools AAS-10A RF Probe The AAS-10A allows you to troubleshoot the handset. You can use the probe with the XRS-6 RF Cable. CA-22DS Flash Cable The CA-22DS allows bottom connector flashing using the FLS-4S Flash Adapter or the FLC-20 Flash Device. CA-25RS RF Test Cable The CA-25RS test cable is used for RF engine testing and tuning. This cable snaps directly on the mobile terminal’s RF connector and converts the output to an surface mounting assembly connector. Removal of the A-cover is required. ...
Page 4 ©2005 Nokia Corporation Company Confidential Issue 01 04/2005 DAU-9S FBUS/MBUS Cable The DAU-9S is a general purpose cable that supports FBUS/MBUS communication between a Mod-10 device and a PC. DAU-9T FBUS Cable The DAU-9T provides a connection from the serial port of the computer to the Pop-portTM connector of the mobile terminal. DKU-5F Flash Cable The DKU-5F is a single-cable flashing solution for CDMA handsets that include Pop-portTM connectors. This cable supports Diego, Phoenix, and UPST service tools. Note: Customers using the UPST application also require a Spirent protection key (dong ...
Service Tools 2118 (RH-77) Issue 01 04/2005 ©2005 Nokia Corporation Company Confidential Page 5 FLS-4S Flashing Device The FLS-4S allows Point of Sale (POS) locations to flash the handset and power the FLA-44 Flash-loading Adapter. The FLS-4S works with the XCS-1 Service Cable (not included). FPS-8 Flash Prommer The FPS-8 is used for mobile terminal flashing at authorized service centers. JBV-1 Docking Station The JBV-1 connects flash prommers. The docking station can be powered by the FPS-8 Flash Prommer or by an external power supply. ...
Page 6 ©2005 Nokia Corporation Company Confidential Issue 01 04/2005 MJ-42 Module Test Jig The MJ-42 allows PWB-level service and troubleshooting for authorized service centers. It supports regulated and unregulated DC input voltages and includes Local and Normal Mode operations, a headset jack for audio tests, a RUIM card reader, and a second DC input for VCHAR used in EM tuning. The MJ-42 also supports simultaneous RF connections to the CDMA engine. A completely functional UI module is provided on the right side. MJF-17 Docking Station Adapter The MJF-17 works in conjunction with the JBV-1 Docking S ...
Service Tools 2118 (RH-77) Issue 01 04/2005 ©2005 Nokia Corporation Company Confidential Page 7 PKD-1 Software Security Dongle The PKD-1 is a hardware dongle that, when connected to the parallel (LPT) port of the PC, enables the use of the service software. It is not possible to use the service software without the dongle. Printers or other peripheral devices can be connected to the PC through the dongle, if needed. Caution: Make sure that you have switched off the PC and the printer before making connections. Caution: Do not connect the PKD-1 to the serial port. You may damage your PKD-1 and/or your PC. RJ-32 Rework Jig The RJ ...
Page 8 ©2005 Nokia Corporation Company Confidential Issue 01 04/2005 SS-13 Tuning Docking Station The SS-13 is used with the MJF-x/DA-x Docking Station Adapters (shown with MJF-17) for CDMA RF autotuning. XCS-4 MBUS/FBUS Cable The XCS-4 is a general purpose cable for flashing and communicating with the mobile terminal. It is used to connect the FPS-8 Flash Prommer to the docking station adapter or the service jig. ...
Service Tools 2118 (RH-77) Issue 01 04/2005 ©2005 Nokia Corporation Company Confidential Page 9 Flashing, Testing, and Tuning Use the following setups with either manual or automatic tuning with the Phoenix Service Software. Service Configuration 1: Point of Sales Flashing Item Name Type Code 1 FLS-4S flash device (sales pack) (ACF-8 power supply is included in the FLS-4S sale pack) FLS-4S 0080543 2 Service cable CA-22DS 0730311 Point-of-sale service software Diego Phoenix 8405139 8407840 NOTE Other POS flashing configurations available: USB single-flash cable (DCT4 only) USB flash cable for DCT3/DCT4 handsets DKU-5F FLC-20 008 ...
Page 10 ©2005 Nokia Corporation Company Confidential Issue 01 04/2005 Service Configuration 2: Flash Programming Using Docking Station Item Name Type Code 1 Flash prommer box (sales pack) Included in FPS-8 sales pack: Service cable Serial cable Power supply FPS-8 CA-10DS AXS-4 ACF-8 0080321 0730298 0730090 0680032 2 Docking station JBV-1 0770298 3 Docking adapter MJF-17 0774282 4 DC power cable PCS-1 0730012 5 Modular cable XCS-4 0730178 Software protection key (not shown) PKD-1 0750018 Service software CDMA Phoenix 8407840 1 2 3 4 5 ...
Service Tools 2118 (RH-77) Issue 01 04/2005 ©2005 Nokia Corporation Company Confidential Page 11 Service Configuration 3: Covers-Off Troubleshooting Using Service Jig Item Name Type Code 1 Module repair jig (includes RF test cable) MJ-42 CA-25RS 0780317 0730316 2 DC power cable PCS-1 0730012 3 RF test cable XRS-6 0730231 4 Service MBUS/FBUS cable DAU-9S 0730108 5 Software protection key PKD-1 0750018 Service software (not shown) Phoenix 8407840 5 2 1 4 3 ...
Page 12 ©2005 Nokia Corporation Company Confidential Issue 01 04/2005 Service Configuration 4: Automated Tuning and Alignment This setup is used for tuning of the handset at Nokia Authorized Service Centers. Item Name MFR Model # QTY Comment 1 Vector Signal Analyzer Agilent E4406A 1 2 Signal Generator Agilent E4420B 1 Digital signal generator with high-stability oscillator and high-spectral purity 3 RF Series GreenHill TVi9901 1 4 Power Supply Keithly K2306 2 Programmable with sense wire 5 Win2000 PC Dell with Pentium III or above, network card, 256M RAM, 20GB HD, CD-ROM, etc. 6 GPIB Interface NI GPIB ...
Handhelds PDF Instructions
Instruction booklet for the SmartShopper 301 Handhelds. It contains information on device operation tips, network configuration, installation steps.
Barcode Verification Solution Unitech HT630 Technical setup manual for the Unitech HT630 Barcode Reader. This reference manual explains basic operation, network configuration, support details.
MobileMapper ™100 Getting Started Guide DRAFT#1, July 28, 2010 User guidebook for the ashtech ProMark 100 Receiver. It provides instructions for basic operation, product handling, hardware instructions.
Device guide for the Motorola MC40 Handhelds. This guide provides information on device features, operational procedures, warranty information, specifications.