OCULUS Go Cleaning Manual

Text of OCULUS Go Cleaning Manual

Cleaning the Facial Interface (foam)

Cleaning the foam-based facial interface of the Oculus Go is vital when a single headset is being utilised by multiple users. Thankfully, cleaning an Oculus Go headset is simple. Please note: this may require multiple wipes. 1. Lift the plastic arms holding the strap into a vertical position. 2. Remove the Facial Interface from the Oculus Go headset. With the inside of the headset (with the lenses) facing you, grab the

OCULUS Go 4. Lastly, make sure to deep clean the nose gap section of the Facial Interface.

Washing the Facial Interface (foam) - If the facial interface is too dirty to clean with anti-bacterial wipes, you can wash the headset under the tap with cold water and a small amount of detergent. - If you have 10 or more Facial Interfaces to clean, you may use a washing machine for no longer than 30 minutes using cold water. If possible, the ideal solution is to put all of

OCULUS Virtual Reality Headsets Owners Instructions: