Obihai OBi300 Setup Manual

Connect your OBi300 ATA to the internet through a wired or wireless connection. CONNECT VIA WIRED CONNECTION 1. Remove the OBi300 ATA from the box and plug in the power cable. 2. Use the included network cable to connect to an available port on your internet router—OR—to connect wirelessly, please follow ...

1. Plug the OBiWiFi USB dongle to the OBi300 ATA USB port. 2. Check if the OBiWiFi USB dongle has a blinking BLUE light. The OBiWiFi USB dongle MUST show a blinking blue light to proceed with the setup. If you do not see a blinking blue light, please do the following: i. Unplug and reinsert the OBiWiFi USB dongle. ii. Restart ...

1 2 3 4 5 1. Go to alaskacommunications.com, click Support, click ONEplace Login, then select ONEplace Users. Or visit: https://oneplace.alaskacommunications.com 2. Log in with your 10-digit telephone number and temporary password provided in your welcome email. 3. The Setup Wizard will prompt you to ...

Your telephone line will remain disabled until e911 response location is set. Note: If you are porting an existing telephone number(s), you must complete this step after the port is complete. 1. Open a web browser and go to https://oneplace.alaskacommunications.com 2. Log in with your 10-digit telephone nu ...

1. Using the telephone connected to the OBi300 ATA, dial **9 222 222 222 to perform an echo test. 2. Speak a test phrase into the phone to verify the quality of your internet connection. Note: you should hear each word immediately echoed back to you. If you do not hear the word or it sounds garbled, this indicates a network issue. 3 ...