Edelbrock 2121 Installation Instructions
Text of Edelbrock 2121 Installation Instructions
Edelbrock 2121 Catalog #2121, 3721, 3723, 7121, 7521, 75213
Rev. 1/08 - AJ/mc
©2008 Edelbrock Corporation
Brochure #63-0350
Page 1 of 3
Performer and Performer RPM Intake Manifolds
For 260-302 c.i.d. Small Block Ford Engines
Catalog #s 2121, 3721, 3723, 7121, 7521 & 75213
INSTALLATION INSTRUCTIONS
PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with common tools and
procedures. However, you should be f
Catalog #2121, 3721, 3723, 7121, 7521, 75213 Rev. 1/08 - AJ/mc
©2008 Edelbrock Corporation
Brochure #63-0350
Page 2 of 3
Manifold 2121 (Non-Emissions):
Manifold 7121, 7521, 75213 (Non-Emissions):
•
THROTTLE BRACKETS:
Due to the design of Performer manifolds, the throttle and kickdown bracket on some vehicles may require
modification to fit. When using Edelbrock carburetors, use #1490 or 1845 throttle plate kit. See Figure 1.
•
GASKETS: Do not use comp
Catalog #2121, 3721, 3723, 7121, 7521, 75213 Rev. 1/08 - AJ/mc
©2008 Edelbrock Corporation
Brochure #63-0350
Page 3 of 3
INSTALLATION INSTRUCTIONS
1)
Use only recommended intake gaskets set when installing this intake manifold.
2)
Fully clean the cylinder head intake flanges and the engine block end seal surfaces.
3)
Apply Edelbrock Gasgacinch sealant P/N 9300 to both cylinder head flanges and to the cylinder head side of the gaskets,
allow to air dry, an