niclimbingframes The Castle Instruction Manual

Text of niclimbingframes The Castle Instruction Manual

9ft post cut

at 40° angle 4 2 9ft posts with caps 4 3 790mm x 6” x 1” boards (3 panels pre- assembled) 54 4 1575mm post 8

6” x 1” small

board for roof 2 7 6” x 1” large board for roof 2 8 1755mm x 1755mm base 2 9 1575mm x 3” x 1.5” timber 10 + 20 for picnic table + 10 for castle effect

8 + 2 for

picnic table 11 Railings Open Railing Closed Railing 10 (8 for towers and 2 for bridge) 12 Decking screws Approx. 300

Set of steps

1 16 Screw covers 40 17 2350mm 6”x1” boards 26

16 (or 32

3” x 1.5” slats) 22 2450mm x 3” x 1.5” doubled up 2 23 1575mm x 3” x 1.5” doubled up 2

Other components included: Handgrips, telescope, steering wheel.

Tools needed: • Cordless drill • Handsaw • Spirit Level • Hammer • Shovel • Stepladder • Pencil • Measuring tape • 10mm Hex bit • PZ 2 Drill Bit

1. Lay out the bases and slide in the position that you intend the climbing frame to be placed.

Ensure the bases are 2160mm apart and are parallel of any buildings, fences etc. that you are wishing to match in with. This will give you the size of the footprint the frame will take up in the garden. 2. Allow for at least 2m clearance beyond the end of the slide and 1.5m clearance for the other modules. 3. Once you are happy that the layout

niclimbingframes Play Sets & Playground Equipment Owners Instructions: