Edelbrock 5291 Installation Instructions
Text of Edelbrock 5291 Installation Instructions
Edelbrock 5291 ©2002 Edelbrock Corporation
Page 1 of 3
Rev. 1/02
EDELBROCK SUSPENSION
Sub-Frame Connectors
For 1994-2002 Mustang GT & 1999-2002 Mustang Cobra
Catalog #5291
INSTALLATION INSTRUCTION
Please study these instructions carefully before installing your new sub-frame connectors. If you have any
questions or problems, contact our Technical Hotline at: 1-800-416-8628 from 7 am - 5 pm, Monday through
Friday, Pacific Standard Time or e-mail us at: edelbrock@edelb
©2002 Edelbrock Corporation Page 2 of 3
Rev. 1/02
INSTALLATION INSTRUCTIONS
1.
Place vehicle on a drive-on style of lift
(preferred) or lift vehicle so as to keep the
suspension loaded with the vehicle weight.
Spring rates must be equal from the left side to
the right side, and the weight of the vehicle must
be supported by the springs during installation
as if the vehicles were on its wheels. If vehicle
is support by its wheels, tire pressures must be
e
©2002 Edelbrock Corporation Page 3 of 3
Rev. 1/02
7.
Begin welding by tack welding both the front
then the rear of the subframe connector to the
floor pan. Once it is securely tack welded in,
then start to do the final welding. Weld the seat
bracket to the subframe connectors securely. It
may be necessary to lift the connector bar to
meet and close any large gaps between the
connector and the seat reinforcement bracket.
8.
Place
the
transmission
cross