Edelbrock 5672 Installation Instructions
Text of Edelbrock 5672 Installation Instructions
©2007 Edelbrock Corporation
Brochure #63-5672
Page 1 of 2
Catalog #5672 & #5673
Rev. 3/07 - DA/mc
EDELBROCK CAT-BACK EXHAUST SYSTEM
See Vehicle Applications Below
Catalog #5672 & #5673
INSTALLATION INSTRUCTIONS
Suggested Tools for Installation:
❑3/8” rachet set and metric sockets
❑15mm wrench
❑Jackstands and jack
❑Liquid penetrant and rubber lubricant
DISASSEMBLY
1.
Raise vehicle and support with the proper jackstands for
the weight, leaving the
Tailpipes (Polished Stainless)
1
23-4068
Hanger Clamp
3
46-6612
3” Band Clamps
2
46-6610
2-1/2” Band Clamps
1
33-4602
2-Bolt Flange
Band Clamp
Band Clamp
Muffler (SDT)
Overaxle Pipe
WARNING: Support your vehicle with
proper jackstands rated for the total
vehicle weight. Place stands s