Edelbrock 66042 Installation Instructions

Text of Edelbrock 66042 Installation Instructions

Catalog #66042 & #66043

©2006 Edelbrock Corporation Page 1 of 2 Brochure #63-66042 Rev. 5/06 - DA/mc • PLEASE study these instructions carefully before installing your new Tubular Exhaust System (TES). If you have any questions, please contact our Technical Hotline at : 1-800-416-8628 from 7 am - 5pm, Monday-Friday, Pacific Standard Time or e-mail us at [email protected]. Please complete and mail your warranty card. Be sure to write the model nu
Catalog #66042 & #66043 ©2006 Edelbrock Corporation Page 2 of 2 Brochure #63-66042 Rev. 5/06 - DA/mc • DISASSEMBLY 1. Disconnect negative battery cable. 2. Raise vehicle and remove O2 sensor from factory Y-pipe, being careful not to damage. 3. Remove bolts holding front universal joint on front drive shaft. Slip yoke back and move driveshaft over to driver side lower suspension arm and attach with wire or rope. Special NOTE: If your Jeep has a front d

Edelbrock Automobile Parts Owners Instructions: