Edelbrock 6661 Instructions

Text of Edelbrock 6661 Instructions

2. Remove O2 sensor, being careful not to rupture or

destroy the unit. W ARNING: Do not clean this unit in any cleaning solvent and do not rupture wire. 3. Making sure the converter is cool, remove the exhaust crossover pipe. You may find it helpful to clamp the con- verter to the crossmember using pieces of wood and C- clamps. This will allow you to work the crossover pipe loose from the converter more easily. If the pipe is frozen to the converter, it c

5. Re-connect spark plug wires on left side.

6. Re-install temperature sensor wire to temperature sensor. ASSEMBLY - RIGHT SIDE 1. Install T.E.S. flange gasket and one 3/8"-16 x 1" bolt, lock washer and flat washer at rearmost bolt hole (leave bolt loose enough to accept T.E.S.). 2. Install dipstick tube and right side T.E.S. manifold from top side. 3. Install remaining bolts and lock washers. Use original equipment stud-bolt to re-attach dip stick bracket

Edelbrock Automobile Parts Owners Instructions: