Leine & Linde 901 Mounting Instructions

901 903 921 923 ...

production of encoders for heavy duty applications. Some of the values offered by Leine & Linde are local technical support and possibility of 24 hours express delivery. On our website www.leinelinde.com you can find • data sheets and other product information • detailed man ...

2. Part of the products _________________________ 8 3. Risk of damage to the product ______________ 12 4. Mounting of hollow shaft, torque arm and solid shaft _________________________________ 14 5. Check points for mechanical mounting ______ 16 6. Electrical mounting _____ ...

mounting instructions: Folgende Modelle werden vollständig von dieser Montageanleitung abgedeckt: 本安装说明全面涵盖下列型号： The following models have customised properties and may deviate slightly ...

products Produktteile 产品部件 9 Hollow shaft encoder 2.1 Hollow shaft 2.2 Torque arm bracket 2.3 Flange 2.4 M12 connector 2.5 Back cover Hohlwellen-Drehgeber 2.1 Hohlwelle 2.2 Befestigung Dreh- momentstütze 2.3 Flansch 2.4 M12 Stecker 2.5 Rückseite 空心轴编码器 2.1 空心轴 2.2 扭矩支架 2.3 法兰 2.4 M12 连接器 2.5 后� ...

products Produktteile 产品部件 Dual hollow shaft encoder 2.16 Hollow shaft 2.17 Torque arm bracket 2.18 Flange 2.19 M16 cable gland 2.20 M23 connector 2.21 Module A 2.22 Module B DUO-Hohlwellen- Drehgeber 2.16 Hohlwelle 2.17 Befestigung Dreh- momentstütze 2.18 Flansch 2.19 M16 Kabeldurch- führung 2.20 M23 Stecker 2.21 Modul A 2.22 Mod ...

to the product Beschädigungs- gefahr 产品损坏风险� ESD V 3.1) 3.2) 3.3) 3.4) 3.5) 3.6) 3.7) 12 The product is a precision measuring instrument. It should be handled with care, by experienced person- nel. The warnings below apply in the event of effects outside the limit values stated in the product’s data sheet. The product may be ...

Accessories from Leine & Linde (to be ordered separately, see page 30) Tools for mounting Kundenkomponente Zubehör von Leine & Linde (separate Bestellung, siehe Seite 30) Montagewerkzeug � ...

5.1 Check that the dimensions of the mating shaft match the specifications in the encoder’s data sheet. Fix the encoder with an M5 or M6 screw (ISO 4762) with minimum 9 mm t ...

mating shafts. Always try to avoid a) radial displacement b) angle displacement c) axial movement. 5.6 Always use a flexible shaft coupling for mount- ing in ...