Wasp WPA1200 Product Reference Manual

i Laser Information The WPA1200 series is certified in the U.S. to conform to the requirements of DHHS/CDRH 21CFR Subchapter J and to the requirements of IEC 825-1. Class II and Class 2 products are not considered to be hazardous. The WPA1200 series contains an internal Visible Laser Diode (VLD) The VLD emissions do not exceed ...

ii Table of Contents Chapter 1: Getting Started ........................................................................................................................................1 Introducing the WPA1200...................................................................................................................... ...

1 Chapter 1: Getting Started Introducing the WPA1200 Thank you for purchasing the WPA1200 PDA Barcode Scanner. Your WPA1200 was designed for users who need a compact and durable PDA for data collection and real time transactions. The WPA1200 is a rugged, compact and lightweight palm-sized computer using the Windows Mobile 5.0 ...

2 WPA1200 AC Adaptor with Universal Plug Battery Pack Stylus USB Charging Cables Elastic Stylus String CD-ROM Quick Start Guide Package Contents After opening the box, ensure the following accessories for the WPA1200 are present: If an item is missing or appears damaged, please contact your dealer. ...

3 A Tour of the WPA1200 The following sections describe the main components and features of the WPA1200. No. Component Description 1 Status Indicator Indicates the battery charging and barcode scanning status. Green - Battery is fully charged, or barcode ED scanning process is completed without error. Red - Battery is charging ...

4 finger. 8 Speaker Enables you to hear audio from the WPA1200. Back View No. Component Description 9 Battery Compartment Houses the removable and rechargeable 3.7 V, 1950 mAH battery pack. 10 Battery Compartment Release Latch Opens the battery compartment. 11 Reset Button Press the end of the stylus into the button to reset y ...

5 Getting Started This section explains how to install and charge the battery, how to check battery status, how to turn on the WPA1200, and how to calibrate the screen. Installing the Battery Warning: There is a risk of fire and burns if the battery pack is handled improperly. DO NOT disassemble, crush, puncture, short externa ...

6 3. Position the battery pack, making sure the battery contacts are aligned with the contacts in the compartment and the battery is placed on top of the plastic tab, as shown in the following illustration. 4. Slide the battery pack into the battery bay while simultaneously pulling the securing clip until the battery clicks in ...

7 Charging the Battery Before using the WPA1200 for the first time, you need to charge it for about 16 hours. After that, you can charge the WPA1200 daily for 4 hours to recharge the battery to full capacity. Charge the WPA1200 using the USB charging cable. Caution: Operating the WPA1200 for the first time without the AC adapt ...