Watchguard SSL 1000 Setup Manual

2 WatchGuard SSL 500 & SSL 1000 WatchGuard SSL 500 and SSL 1000 Setup 1 Register your WatchGuard SSL User Pack with LiveSecurity® Service „ Find the license that came with your WatchGuard SSL User Pack. „ Go to http://www.watchguard.com/activate. „ Log in. „ Follow the instructions on the screen. „ Record your selected domain name for later use. „ Download and extract the License_WGLic.tgz file. You will need this file in step 4. 2 Download WatchGuard software „ Go to https://www.watchguard.com/archive/softwarecenter.asp. „ Download the most current versions of the WatchGuard SSL software installers. Š Ad ...

3 Install the WatchGuard Administrator software System Requirements „ Select a dedicated computer on which to install the WatchGuard Administrator services. If you turn this computer off, the services do not run and no connections to the WatchGuard SSL device can be made. „ Run the WatchGuard Administrator installation program, AdministrationService.exe. „ To start your service, reboot your system or use the Windows Control Panel > Administrative Tools > Services applet to manually start the WatchGuard Admin Service. 4 Set up your system „ Go to https://127.0.0.1:8443. „ When WatchGuard Administr ...

4 WatchGuard SSL 500 & SSL 1000 5 Install WatchGuard Authentication Service „ Run AuthenticationService.exe. „ Follow the steps in the wizard to complete the installation. „ When prompted for the system IP address, type the IP address of the computer on which you are installing this service. „ Reboot your computer or use the Windows Control Panel > Administrative Tools > Services applet to manually start the WatchGuard Authentication Service. 6 Install WatchGuard Policy Service „ Run PolicyService.exe. „ Follow the steps in the wizard to complete the installation. „ When prompted for the system IP address, t ...

8 Configure your WatchGuard SSL Access Point „ Connect Eth1 on your WatchGuard SSL Access Point device to the ethernet interface of a computer configured with an IP address on the 192.168.111.0/24 network. The default IP address of Eth1 on the WatchGuard SSL device is 192.168.111.1. „ Go to http://192.168.111.1:8080. When prompted, log on with default log in credentials: „ To update your Access Point software, select Administration > Update and browse to the location where you saved the new Access Point software in step 2. „ Before you configure your Access Point you must decide how the Access Poi ...

Suite 500 Seattle, WA 98104 SUPPORT www.watchguard.com/support U.S. and Canada +877.232.3531 All Other Countries +1.206.613.0456 SALES U.S. and Canada +1.800.734.9905 All Other Countries +1.206.613.0895 No express or implied warranties are provided for herein. All specifications are subject to change and any expected future products, features or functionality will be provided on an if and when available basis. ©2008 WatchGuard Technologies, Inc. All rights reserved. WatchGuard, the WatchGuard Logo, Firebox, and Livesecurity are either trademarks or registered trademarks of WatchGuard Technologies, Inc. in the United Stat ...