Jung BTS01 Product Documentation
Text of the manual
Art. No. BTS01
ALBRECHT JUNG GMBH & CO. KG
Volmestraße 1
58579 Schalksmühle
GERMANY
Telefon: +49 2355 806-0
Telefax: +49 2355 806-204
[email protected]
www.jung.de
Issue: 20.10.2016
TD 11001211
Art. No. BTS01
Table of Contents
Product definition
1
3
.................................................................................................................
Product catalogue
1.1
3
...........................................................................................................
Function
1.2
3
..........................................
Art. No. BTS01
1 Product definition
1.1 Product catalogue
Product name: Condensation sensor
Use:
Sensor
Design:
SM
Art. No.
BTS01
1.2 Function
General
The device serves to detect unwanted condensation, in particular on coolant lines in residential
or functional buildings. For example, condensed water can run down coolant lines or drip from
cooling ceilings
Art. No. BTS01
2 Mounting, electrical connection and operation
2.1 Safety instructions
Electrical devices may only be mounted and connected by electrically skilled
persons.
Failure to observe the instructions may cause damage to the device and result in fire and
other hazards.
Danger of electric shock. During installation and cable routing, comply with the
Art. No. BTS01
2.2 Device components
The device consists of a unit, including connection cable. The device may not be opened.
i
The device will be destroyed if it is opened.
2.2.1 Parts
Figure 1: Device components Condensation sensor
(1)
Connecting cable
(2)
Fixing strap
(3)
Recession for fitting on ductwork with cable ties
(4)
Recession for a thermally co
Art. No. BTS01
2.2.2 Dimensions (mm)
Figure 2: Top view
Figure 3: Bottom view
Figure 4: Page view
Figure 5: Front view
Page 6 of 17
Mounting, electrical connection and operation
Art. No. BTS01
2.3 Fitting and electrical connection
Fitting the condensation sensor
The installation location should be the position that is most likely to have condensation. That
can be the coldest spot within a pipeline circuit.
i
For proper function, the sensor surface must be ventilated so that condensation can form
on it.
i
When fitted in the vicinity
Art. No. BTS01
Connecting the condensation sensor
The device is directly connected to an evaluation unit (e.g. KNX valve drive (motor-operated)
with controller) and electrically supplied by it.
Figure 7: Connecting the device
(9)
Evaluation unit
o
Connect the device to an evaluation unit that supplies and monitors the device.
i
Observe the polarity:
Brown =