Vantec NextStar3 Operation & User’s Manual

Text of the manual

2.5” NexStar 3 SuperSpeed USB 3.0 & eSATA Enclosure

2 3 USB 3.0 Cable 4 Installation Screws eSATA Cable User’s Manual Note: When using eSATA, please make sure to connect the eSATA cable first before connecting the Y-cable for power. TRADEMARKS MS-DOS, Microsoft, Windows NT/2000/XP/Vista/7 are trademarks of Microsoft Corporation. Apple

1. Introduction ................................................................................................................02

2. Specifications/Features ....................................................03 NexStar 3 Superspeed External 2.5” HDD Enclosure NexStar 3 Superspeed External 2.5” HDD Enclosure NexStar 3 Superspeed External 2.5” HDD Enc

Form and functionality collide with style in the

NexStar 3 SuperSpeed USB 3.0 & eSATA External Hard Drive Enclosure from Vantec. With its mirror finish and sleek curves, the Vantec NexStar 3 SuperSpeed stands out from the crowd. The sturdy drive cage protects your hard drive while the aluminum case effectively dr

• Device Support:

SATA I/II (SSD, Hard Drive) • Device Size: 2.5” (7mm, 9.5mm, 12.5mm) • Internal Interface: SATA *For the most updated Storage Capacity, please check our website: www.vantecusa.com • External Interface: USB 3.0 & eSATA • HD Capacity:

3. System Requirements:

System Requirements 4 Microsoft Windows XP/Vista/7 Mac OS 10.4 & greater 1. For USB 2.0 speeds, the system must support USB 2.0 specifications 2. For USB 3.0 speeds, the system must support USB 3.0 specifications 1. For USB 2.0 speeds, the system must support USB 2.0 specifications 2. For USB 3.0 speeds, the system must support USB 3.

4. Parts Layout:

Parts Layout 5 2.5" SATA to USB 3.0 & eSATA External Hard Drive Enclosure eSATA USB

5.1. Hardware Installation:

2.5" SATA to USB 3.0 & eSATA External Hard Drive Enclosure Remove the side of the NexStar 3 SuperSpeed with the power and USB connection ports. Carefully slide out the hard drive caddy. (1) (2) Preparing the NexStar 3: ( figure 5.1-A )

Installing the hard drive in the NexStar 3 SuperSpeed:

( figure 5.1-B ) ( figure 5.1-C ) ( figure 5.1-D ) ( figure 5.1-C ) (2)Align the hard drive mounting holes with the holes on the back of the drive caddy and secure the hard drive with the screws provided. Installation 7 ( figure 5.1-B ) (1)Connect the SATA and power connector to the hard drive as picture

Connecting the NexStar 3 to your computer:

NOTE : For new hard drives, you will need to initialize and partition your hard drive before it will appear in Windows Explorer or on your Mac desktop. Please refer to your hard drive manufacturer's documen- tation or read the"Creating a New Partition" section of this manual. If you can see the USB ic

More Vantec Storage Owners Instructions: