Lanner R6S Operation & User’s Manual

Vehicle Computing Rugged Platforms for Vehicles and Railway Computing 2021/02/02 ...

１ Back Icon Descriptions The icons are used in the manual to serve as an indication of interest topics or important messages. Below is a description of these icons: Icon Usage Note or Information This mark indicates that there is something you should pay special attention to while using the product. Warning or Important This ...

２ Back Notice (1) A Unshielded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord by used. (2) Use only shielded cables to connect I/O devices to this equipment. (3) Changes or modifications not expr ...

３ Back • Dispose of used batteries according to the instructions. • Installation should be conducted only by a trained electrician or only by an electrically trained person who knows all installation procedures and device specifications which are to be applied. • Do not carry the handle of power supplies when moving to another place. ...

４ Back Mounting Installation Precautions Environment: The following should be put into consideration for rack-mount or similar mounting installations: • Do not install and/or operate this unit in any place that flammable objects are stored or used in. • The installation of this product must be performed by trained specialists; otherwise ...

５ Back Grounding Procedure for Power Source • Loosen the screw of the earthing point. • Connect the grounding cable to the ground. • The protection device for the power source must provide 30 A current. • This protection device must be connected to the power source before power. • The cable hould 16 AWG. Procédure de mise à la t ...

６ Back Consignes de sécurité électrique 1. Avant d’allumer l’appareil, reliez le câble de mise à la terre de l’équipement à la terre. 2. Une bonne mise à la terre (connexion à la terre) est très importante pour protéger l’équipement contre les effets néfastes du bruit externe et réduire les risques d’électrocution e ...

Chapter 1: Product Overview ................................................. ８ Package Content �������������������������������������������������������������������������������� ...

８ Back Chapter 1: Product Overview Built for rolling stock settings, R6S has gone through extensive vibration and shock testing. The system is certified with EN 50155, EN 50121-3-2, EN 50121-4, EN 50125-3 and EN 45545 standard as a fanless roll- ing stock computer. R6S not only features high-performance Intel Core i7-7600U CPU, but also boa ...

９ Back System Specifications Processor System CPU Intel® Core™ i7-7600U CPU onboard Frequency 2.8 GHz BIOS AMI SPI Flash BIOS Chipset SoC Fanless Yes Memory Technology 1x DDR4 2133 SO-DIMM Socket Max. Capacity Up to 16GB (Factory default: 16GB pre-installed) Socket 1x 260-pin SODIMM Ethernet Controller 4x Intel i210IT Speed 10/100/1000 M ...