Maco Antennas MULTI Maintenance And Adjustment Instructions

Maintenance and adjustment instructions for turn-only, turn&tilt, tilt-first and tilt hardware ONLY FOR CERTIFIED SPECIALISTS! NOT FOR END USERS! ...

MACO MULTI Contents Safety and warning information 3 Measures to preserve the surface finish 5 Setting the turn-only, turn&tilt and tilt-first sash Setting the scissor stay or turn-only hinge - sash part – lift/lower 6 Setting the scissor stay or turn-only hinge – gasket compression 7 Pivot post setting 9 - 10 Tilt-only sash setting 12 Setting the closing element, setting the sash lifter 13 Hinging and unhinging the sash 14 - 15 These maintenance instructions are only intended for certified specialists and their trained employees. In addition to these maintenance instructions, the operation and maintenance instructions for the end user mus ...

MACO MULTI Safety and maintenance information WARNING! Risk of injury due to improper maintenance operations. Improper maintenance can lead to serious personal injury or material damage. For this reason: � �■��Before�starting�work,�ensure�there�is�sufficient� room for carrying out assembly work. � ■��Ensure�that�the�assembly�site�is�kept�clean�and� tidy. Loose components and tools lying around or on top of each other can cause an accident. Only use intact tools. � ■��Work,�such�as�the�adjustment�of�hardware�– particularly near to the pivot post and the scissor stay – a ...

MACO MULTI NOTE� �Warranty�claims�can�only�be�accepted�if�all maintenance operations have been carried out in full and according to the maintenance intervals (specified�in�the�end�user�operating�instructions),� and�this�can�be�verified. NOTE �Warranty�claims�can�only�be�accepted�if�the�unit� has�been�installed�correctly�and�by�a�certified� specialist. ...

MACO MULTI Measures to preserve the surface-finish Protection against soiling: ■��The�hardware�should�be�kept�free�of�debris�and�soiling.�Immediately� remove soiling during the building stage caused by plaster, mortar or similar with water. ■��Protect�hardware�components�from�contamination�(dust,�dirt,�paint,� etc.). Protection against corrosion: ■��Ventilate�the�hardware�and�or�the�rebate�areas�so�that�they�are�not exposed to direct moisture or condensation (important during the building stage). ■��Aggressive�vapours�in�conjunction�with�small�format ...

MACO MULTI max. 1 +2,85 / -1,8 4 1. -3 / +5 9 Setting scissor stay or turn-only hinge 1. Lift/lower ■ MULTI-MATIC / MULTI-TREND corner hinge version ■ MULTI-MATIC / MULTI-TREND stay and hinge The adjusting screw must not protrude more than a maximum�of�1�mm! The sash may only be lowered to the third notch and/or to the red mark, otherwise the sash can fall out! Adjustment�values�are�always�specified�in�regard�to�the�hinge-side� air gap and/or the bottom horizontal air gap. ■ MULTI MAMMUT The side adjustment of the scissor stays up to version 2 requires the mandatory use of feeler gauge item no. 468684 to ensure ...

MACO MULTI 15 -2,5 / +1 2. 1. 4 -1 / +1 -1,5 / +1,5 4 ■ MULTI POWER 2. Gasket compression ■ MULTI-MATIC scissor stay ■ MULTI-MATIC turn-only hinge - sash part ...

MACO MULTI 4 -1 / +1 -0,7 / +0,7 15 2. 1. ■ MULTI POWER scissor stay ■ MULTI POWER turn-only hinge - sash part ...

MACO MULTI -1 / +1 15 -1 / +1 4 = = -2 / +2 4 -2,3 / +2,3 4 -2 / +3 4 -2 / +2 4 -2,3 / +2,3 4 Pivot post setting ■ PVC / DT / TO / AS pivot post ■ PVC / AS rebated corner support ...

MACO MULTI -0,75 / +0,75 15 -2 / +2 4 4 -2 / +2 -3 / +3 4 -2 / +3 4 ■ Drill-in pivot post ■ MULTI MAMMUT pivot post ...

MACO MULTI 4 -2 / +2 -1 / +1 4 = 3. 2. 1. -2,5 / +2,5 Tilt-only sash setting ■ Gasket compression ■ Side adjustment ■ Lift/lower ...

MACO MULTI 15 -0,55 / +0,55 -0,75 / +0,75 9 + + -3 / +3 15 -3 / +3 15 -0,5 / +0,5 -2 / +2 4 MULTI-MATIC MULTI-TREND Setting the closing element, the bullet catch and the sash lifter ■ Setting the gasket compression on the cam ■ Setting the sash lifter ■ Setting the door catch and/or the bullet catch roll i.S. Security roller cam Locking cam ...

MACO MULTI 3. 1. 2. 3. 4. 1. 2. 3. 2. 1. 1.�Remove�the�cover,�if�there�is�one. 2. Pull the scissor stay-hinge pin downwards with a suitable tool. The scissor stay hinge pin can only be withdrawn when the window is closed. 3. Open the sash 90° (secure against tilting on the espagnolette side), move the rebated scissor stay support arm out of the scissor stay hinge and lift the sash out of the pivot post. For hinging, carry out the above steps in reverse order. ■ MULTI-MATIC / MULTI-TREND scissor stay hinge – stay and hinge As�above,�with�the�exception�that�a�catch�must�be�also�clipped�into� the sci ...

MACO MULTI 2 1 4 5 6 3 ■ MULTI POWER (see also video at www.maco.eu): 1. Open the sash 90°. 2. Trigger the mishandling device 1 (only on turn&tilt windows), turn the handle to the tilt position 2 . 3. Open the scissor stay arm safety device/turn-only hinge arm sa- fety device 3 . 4. Lift the scissor stay and/or turn-only hinge arm until it is completely free 4 , then move it into the frame 5 . 5.�Close�the�sash. 6. Tilt the sash slightly and lift it up and out 6 . For hinging, carry out the above steps in reverse order. Disposal: Disposal of hardware and hinge components must comply with local regulations or laws. Dear customer, ...

BESCHLÄGE GMBH Alpenstraße 173 A-5020 Salzburg +43 662 6196-0 [email protected] www.maco.eu This print document is revised regularly. The latest version is available at http://www.maco.eu/sites/assets/ MacoDocs/757070/757070en.pdf or scan the QR code. Order no. 757070EN – Date: May 2015 Date changed: October 2016 All rights reserved and subject to change. Graphic source: MACO, fotolia.com, Fachverband Schloss- und Beschlagindustrie e.V Satisfied? We appreciate your [email protected] ...