Macab DT-2100 Manual
Text of the manual
ENG-1 • 010326 • 00983
00983-4 DT-2100 ENG-1.p65
2001-03-29, 11:20
49
DT-2100 ........................................... 50
Front ............................................... 51
Back ............................................... 52
Smart card ...................................... 53
Buttons ............................................ 54
Self test ........................................... 54
Menu ove
2. Common interface
3. Fan*
4. Card reader
5. Display
6. LED
”Alarm (red)”
-
”QPSK lock (yellow)”
-
”On indication (green)”
7. Button
”Left/Right”
-
”Up/Down”
8. Button
”Menu”
-
”Enter”
2
4
5
6
7
8
3
1
*The fan is temperature regulated and starts at 30-35
00983-4 DT-2100 ENG-1.p65
2001-03-29
Mains voltage 180–260VAC
2. Balanced audio output, right (XLR)
3. Balanced audio output, left (XLR)
4. Alarm contact jack
5. Aux. COM2-port*
6. Data COM1 for upgrading software (PC).
7. Audio jack right/left (RCA)
8. SVHS jack
9. Video out (1+2)
10. Transport current output Parallel LVDS
11. LNB in 13/18
A CA module connector is located at the front. This is used for channels which are coded in different
transmission systems. Conax, Viaccess, Cryptoworks, Nagravision and Irdeto are common coding
systems which can all be used with the DT-2100.
Insert the programme card into t
Programming is done using the Menu-Enter-Up-Down-Left-Right buttons in conjunction with
the display or the TV screen. Program the QPSK-receiver’s IF, polarity, 22kHz, symbol rate, FEC,
sound and sub-text language. Each satellite receiver is programmed individually.
In order to program the unit, the digital receiver must be powered
- use this button to select settings on menus.
LEFT
- use this button to select numbers. To change the channel.
RIGHT
- use this button to select numbers. To select options on the Info menu.
DOWN
- use this button to select settings on menus.
MENU
- use this button to activate the menu. De-activate the Info menu.
ENTER
- save and
All programming is done using the Menu-Enter-Up-Down-Left-Right
buttons and the DT-2100 display.
TRANSPONDER FREQUENCY “IF FREQUENCY”
MENU Press the Menu button.
Use the Up/Down buttons to specify a number.
Use the Left/Right buttons to move between the numbers.
ENTER Press the Enter button to save and move on to the next menu
option.
T
Use the Up/Down buttons to specify a number.
Use the Left/Right buttons to move between the numbers.
ENTER Press the Enter button to save and move on to the next menu
option.
Hint! 00000 activates auto scanning of the symbol rate.
FEC
Use the Up/Down buttons to select required FEC.
Select Auto for automatic searching of FEC.
ENT
SEARCHING FOR CHANNELS
After adjusting the settings for the required transponders, a channel
search will be carried out. A QPSK lid (yellow LED, constant light)
must be present in order to find any channels. If the alarm lights up (red
LED) the installation and settings must be checked.
ENTER Select YES and press the Enter button to start t