M-system M2PRU Quick Start Manual

PULSE SCALER (field-configurable) Functions & Features • Converts pulse rate into convenient engineering unit for display on a totalizing counter or meter • Excitation • Scaling factor adjustable of 1.0000 × 10 0 to 0.0001 × 10 –6 • Various outputs (open collector, voltage pulse and AC/DC ...

below, could be added if the user need improvement. Limit the input frequency to 10 Hz at maximum. Relay R C PULSE SCALER C = 100 µF R = 100Ω GENERAL SPECIFICATIONS Construction: Plug-in Connection: M3 screw terminals (torque 0.8 N·m) Housing material: Flame-resistant resin (blac ...

(time required for the first pulse to be output from a train of pulse input) Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output to power to ground) STANDARDS & APPROVALS CE conformity: EMC Directive (2004/108/EC) EN 6100 ...

5 9 21.5 (.85) 70.5 (2.78) 86.7 (3.41) 7.3 (.29) 15 (.59) 6 (.23) 59 (2.32) DIN RAIL 35mm wide [4 (.16)] 8–M3 SCREW 72 (2.83) 23 (.91) 2–4.2x5 (.17x.20) MTG HOLE 6 (.24) deep 116.7 (4.59) • When mounting, no extra space is needed between units. 1 4 8 12 14 13 4 (.16) SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM + – ...

EM-5076 Rev.4 PULSE SCALER (selectable range) MODEL M2PRU INSTRUCTION MANUAL BEFORE USE .... Thank you for choosing M-System. Before use, please check contents of the package you received as outlined below. If you have any problems or questions with the product, please contact M-System’s Sales Office or representatives. ■ PACKAGE INCLUDES ...

EM-5076 Rev.4 DIN Rail 35mm wide Spring Loaded DIN Rail Adaptor INSTALLATION Loosen the fixing screw at the front of the unit in order to separate the body from the base socket. ■ DIN RAIL MOUNTING Set the base socket so that its DIN rail adaptor is at the bottom. Position the upper hook at the rear side of base socket on the DIN rail and p ...

5 9 21.5 (.85) 70.5 (2.78) 86.7 (3.41) 7.3 (.29) 15 (.59) 6 (.23) 59 (2.32) DIN RAIL 35mm wide [4 (.16)] 8–M3 SCREW 72 (2.83) 23 (.91) 2–4.2x5 (.17x.20) MTG HOLE 6 (.24) deep 116.7 (4.59) • When mounting, no extra space is needed between units. 1 4 8 12 14 13 4 (.16) ADJUSTMENT PROCEDURE CHECKING 1) Terminal w ...