EDIFIER S550 Operation & User’s Manual

Text of the manual

S550 encore Multimedia Speaker

User Manual Page 1 Important safety instructions WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Thank you for purchasing this EDIFIER product. For generations, EDIFIER tries to provide powered speaker products to satisfy the need of our end customers, even the most deman

Correct Disposal of this product. This marking indicates that this product should not be disposed with other

household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the

Page 3 Connectivity & Placement

Connect to speakers and audio source  Connect the power cord to the subwoofer and plug it into the wall socket, and turn on the power switch, the system is on;  In playing mode, press & hold for approximately 2 seconds to set system into standby mode, LCD display of the wired controller will turn off; press it again to

Page 4 Illustrations

Rear panel of subwoofer Wired controller  Wired controller connector  5.1 input connector ports  Stereo input connector ports  Speaker outputs  Power switch  Power cord connector port  LCD display window and IR receiver  Function/Adjustmen

Page 6 Operational guide

Bass/Treble (-8~8), FRNT/CENT/REAR/SUB (-9~9):  Press Function knob to access master volume/bass/treble/front/central/rear/subwoofer volume settings.  Rotate Function knob or press ADJ+/ADJ- to adjust. Master volume (0~60): Rotate Function knob or press VOL+/VOL- Master Volume Boost: When the master volume is 60, rotate the mas

 Press the “INPUT” button on wired controller or “5.1CH” key on remote control until the LCD displays “5.1CH”.

 Connect the “5.1CH” connector ports to your device with the 6P-6P connecting cable.  Play the music on the connected device and adjust the settings to a desired level.  Dual RCA-Dual RCA audio cables are needed if you

● Check if power is connected, and if the wall outlet is switched on.

● Check if the master volume is turned to minimum. ● Check if the system is in standby. ● Check if the audio input cable is connected correctly. ● Check if there is signal from audio source. ● Check if the batteries are available. If you have any further questions or concerns r

Other Speakers Manuals