JK Audio QuickTap Operation & User’s Manual

telephone base of your existing telephone. 1. Unplug the handset cord from your tele- phone base. 2. Using the black handset jumper cord that we have provided, connect the telephone jack of QuickTap to the handset jack on your tele- phone base. 3. Plug your handset cord, and handset, into the handset jack on Q ...

of the conversation. In other words, whatever you send down the phone line will come back on this jack mixed with the audio from the other side of the call. Two adapter cables are supplied with the QuickTap. One cable has 1/8" mono connec- tors on each end. This cable can be used to connect QuickTap ...

! The QuickTap will work with virtually any tele- phone that is not cellular and does not have a keypad in the handset. It is compatible with analog, digital, PBX, and ISDN telephones and systems. We cannot guarantee that it will work with every telephone out there, but we have yet to hear of one it does ...

1/8" Mono jack Output Impedance 600 ohms Output Level 100 mV RMS Isolation 1500 VRMS Handset and Telephone connectors: Modular 4pin/4wire handset jacks Compatibility Note: Not all telephones are built alike so we cannot guarantee QuickTap will work with any handset design out there. We designed QuickTap to work with m ...

Federal Communications Commission (FCC). This product complies with the standards in Part 68 of the FCC rules. The FCC requires us to provide the following information: 1. Connection and use with the nationwide telephone network The FCC requires that you connect this telephone equipment to the natio ...

made by the manufacturer or its authorized agents or by others who may be authorized by the FCC. For repair procedures, follow the in- structions outlined under the warranty section of the manual. 4. Rights of the telephone company If telephone equipment is causing harm to the network, the telephone company ...

warranty to be free from defective workmanship and materials. In the event that the QuickTap needs repair, you must call us to get an authorization, and then carefully pack and ship it to us. You will pay for shipping to us and we will pay for return back to you, UPS ground. No free repairs will be made if the defec ...