Labconco CentriVap-105 Cold Trap Quick Start Installation Manual
Text of Labconco CentriVap-105 Cold Trap Quick Start Installation Manual
Quick Start Installation Guide 7389912, Rev. B, ECO #L106
Quick Start
Installation Guide
CentriVap® Centrifugal Concentrator Systems
Quick Guide to Installation
Sistemi concentratori centrifughi CentriVap®
Guida rapida all'installazione
Systèmes de concentrateur centrifuge CentriVap®
Guide d'installation rapide
CentriVap® ZentrifugaleKonzentratorsysteme
Page 1 of 4
CentriVap® Centrifugal Concentrator Systems
Quick Guide to Installation
Note: This Quick Guide to Installation may not provide all the information for
your installation. Refer to the User’s Manual for details and precautions. Do not
discard packaging until you have identified all parts that were shipped and the
products operate properly.
Pre
Page 2 of 4
Inlet Fitting
Inlet Hose
Barb
WARNING: It is recommended that the vacuum pump be located inside a fume hood or other laboratory
ventilation device if hazardous solvents are used in the CentriVap. If this is not possible, the vacuum
pump should have a hose attached to the exhaust port and the other end of the hose should be
positioned inside the f
Page 3 of 4
Hose Barb
Clamp
Place the hose barb fitting on top of the
centering ring.
Secure the fitting with the clamp.
On rotary vane pumps only, attach the
exhaust filter to the exhaust port. Some
pumps have filters that screw in.
Others require that a centering ring is
placed on the fitting and then a clamp
secures it similar to the inlet fi
Page 4 of 4
Step 5. Electrical Connections
Vacuum Pump – The vacuum pump is powered through the CentriVap’s controls. If
not equipped, attach a reverse IEC connector to the power cord of the vacuum pump
so it can plug into the back of the concentrator.
CentriVap Concentrator – Plug the CentriVap into the electrical outlet that matches the
rat
Page 1 of 4
Sistemi concentratori centrifughi CentriVap®
Guida rapida all'installazione
Nota bene. Questa guida rapida può non offrire tutte le informazioni necessarie
per l'installazione. Fare riferimento al manuale operativo in merito ai particolari
ed alle precauzioni. Non smaltire l'imballaggio prima di identificare tutti i pezzi
spediti e verificarne