Probasics 8035 Assembly, Installation And Operating Instructions
Text of Probasics 8035 Assembly, Installation And Operating Instructions
Bariatric Bed Rail
Model No. #8035
®
Assembly, Installation and Operating Instruction
SAVE
THESE INSTRUCTIONS
NOTE: Check all parts for shipping damage. In case of damage, DO NOT use. Contact
Carrier
for further instructions.
/ by PMI
NOTE: A brochure entitled ”A Guide to Bed Safety; Bed Rails in Hospitals, Nursing
Homes and Home
http://www.fda.gov/cdrh/beds/.
Health Care: The Facts”can be found on the FDA’s website at
SAFETY
SUMMARY
To ensure the
Bariatric Bed Rail 2
INSTALLATION WARNING
!
After any adjustments, repair or service and BEFORE use, make sure all
attaching hardware is tightened securely.
Always test to make sure that the bed rails are properly and securely in place
before using.
PMI recommends that the mattress be centered on the bed frame.
Otherwise, entrapment may occur between the bed rail and the bed frame.
After raising/lowering the head/foot end of the manual/electric bed, check
Bariatric Bed Rail 3
Mounting Bolts
Bed Rail Mounting Bracket
Bed Rail
Mounting Holes
Mounting Holes
Washer
Washer
Locknut
Locknut
FIGURE 1 - INSTALLING/REMOVING THE BED RAIL MOUNTING
BRACKETS
Bariatric Bed Rail 4
WARNING
!
INSTALLING/RAISING/LOWERING THE BED
RAILS
PMI recommends that the mattress be centered on the bed frame.
Otherwise, entanglement may occur between the bed rail and the bed frame.
When used with a manual/electrical bed, the bed rails DO NOT fall under any
weight limitations. Bed rails can be deformed or broken if excessive bed
pressure is exerted on the bed rails. These bed rails are used for the purpose
of preventing an ind
Bariatric Bed Rail 5
RAISING/LOWERING THE BED RAILS
NOTE: The bed rails have two positions, raised (UP) and lowered (down).
RAISING
Pull plunger pin and grasp the top support of the bed rail.
Pull up on bed rail and release the plunger pin.
Pull up on bed rail until the plunger pin engages the adjustment hole. An
audible “click” will be heard.
1.
2.
3.
1.
2.
3.
LOWERING
Grasp the top support of the bed rail and pull plunger pin.
Lower the bed rail and
Bariatric Bed Rail 7
LIMITED WARRANTY
PLEASE NOTE: THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY
WITH FEDERAL LAW APPLICABLE TO PRODUCTS MANUFACTURED AFTER
JULY 4,1975.
This warranty is extended only to the original purchaser/user of our products.
This warranty gives you specific legal rights and you may also have other legal rights
which vary from state to state.
PMI warrants its product to be free from defects in materials and workmanship for
two (2) yea