VTI 10200 Instruction Sheet

Text of VTI 10200 Instruction Sheet

Handle shelf section assembly parts

Upper pole Lower pole Horizontal mount Vertical mount WARNING: Please keep the TV mounting screws M5, M6, M8, M10 and the L key in a secure location as they may be required for use with the flat panel TV at a later time. Model: 10200

Lay front legs (labeled "O" and "X") on the floor with the brackets

facing upward and inward as illustrated. Note: legs,when placed on the floor should bend upward, off the floor at their top end and the width of the unit should remain constant all the way to the top. 2. Slide each shelf over the brackets of the legs. The largest shelf is the bottom. The top shelf has the VTI decal on it. 3. Slide the two remaining legs onto the

Hand-tighten the upper

pole (with holes) to the lower poles. Upper pole Lower pole 5. In order to have the unit properly aligned, stand unit upright on a level surface. Gently rock unit back and forth to realign and level the unit.TIGHTEN ALL NUTS AND BOLTS WITH WRENCHES AT THIS TIME. Unit should now be properly aligned and level. If unit is not level at this time, repeat the above steps before proceeding to step 6. 8. Insert the two support pole

Tighten the two

supporting poles onto the bottom shelf with two screws as shown (see screw table M). 9. Insert the two horizontal mounts onto the support poles. Note: The mount with adjustable screw(see screw table H) should go on the bottom. Screw(see screw table G) the top mount to desired height from A to F. Adjust the bottom mount height according to the TV screw position later. Top horizontal mount Bottom horizontal mount 12. Unscrew the sc

Electrical bracket assembly instruction

A. Push power cord into cord winder bracket. B. Attach electrical bracket to back side of top shelf with two nuts and bolts (see screw table E). Tighten nuts and bolts securely. Wrap power cord around wings of the bracket. Electrical bracket Bolts 16. Congratulations! Unless you have also purchased the optional laptop shelf or web. cam. platform, you have completed

If any parts or hardware are missing or damaged, Do Not

Return the unit to your dealer. Call the VTI helpline at (626)333-6638 for immediate parts replacement. 15046 Proctor Avenue, City of Industry, CA 91746, USA Tel.:(626)333-6638; Fax:(626)333-6631. Manufacturing, Inc. VTI 17. Assembly laptop shelf instruction (Optional) To install the laptop shelf, wrap the bracket around the TV mount pole and fasten the screws as shown. 18. Assembly Web. Cam. p

VTI TV Mount Owners Instructions: