Pro FPP14206 User's Installation Manual

experienced in electrical wiring, we recommend professional installation to avoid possible personal injury or equipment damage. DISCONNECT ELECTRIC POWER BEFORE INSTALLATION: Can cause electrical shock or equipment damage. DISPOSAL AND RECYCLING: Waste electrical products should not be disposed of with household waste. Please recycle where these facilities exist. Check ...

Features...................................................4 Quick reference to controls ......................5 Date/time settings ....................................6 Operation and programming Operating modes .....................................7 Cost-saving programme schedules .........8 To adjust programme schedules ..............9 Special functions Temporary schedule overrides .............. 10 Extra Hour ................. ...

automatically, or you can adjust it manually to maintain a comfortable indoor environment while minimising energy use and costs associated with heating both your home and the hot water you require. Features • Energy-saving design: Automatically activates or shuts down your heating and hot water up to six times per day to fit your lifestyl ...

30/12/2021 cont once auto off cont once auto off on 1 off 1 on 2 off 2 on 3 off 3 Quick reference Press to extend hot water heating (see page 11) Line of text area Current time Current day Operating modes (see page 7) Daily programme periods (see page 8) Press to override hot water (see page 10) Light is on when hot water heater is on Press to programme next day (see page 9) Press to copy a ...

6 Date/time settings To change the date or time, set the slider to DAY/TIME. Use the + or - buttons to set the correct day, then press the OK button. Follow the same procedure to set month, year and time. Date and time are set at the factory and should not need to be changed unless you turn off the automatic daylight savings feature (see pages 21-23). RUN TIP: While setting the time, press and hold the +/- buttons to change the cl ...

can set the Hot Water and Heating modes separately, by pressing the appropriate button as shown at left. Both work the same way: Cont: Heating or Hot Water remains on continuously. Auto: In this mode the Digital Timer follows a daily schedule for the Hot Water or Heating, turning each on and off at preset times during the day (see page 8). Once: In this mode the Heating or ...

8 Cost-saving programme schedules Monday-Friday ON 1 [off 1] ON 2 [off 2] ON 3 [off 3] Heating 6:30am 8:30am 12:00pm 1:00pm 4:30pm 10:30pm Hot water 6:30am 8:30am 12:00pm 1:00pm 4:30pm 10:30pm Saturday-Sunday ON 1 [off 1] ON 2 [off 2] ON 3 [off 3] Heating 6:30am 9:30am 12:00pm 1:00pm 4:30pm 11:00pm Hot water 6:30am 9:30am 12:00pm 1:00pm 4:30pm 11:00pm The Digital Timer is preset at the factory to turn off your home heating and hot ...

The Hot Water and Heating schedules must be programmed independently, but the procedure is the same for both. 1 Move slider to HOT WATER or HEATING, then press + or - to adjust the “On” time for Period 1 as shown at left. 2 Press OK to save, then press + or - to adjust the “Off” time for Period 1. Repeat for all time periods. 3 After all Monday time periods are set, press the NEXT DAY button to adjust settings for Tu ...

The OVERRIDE buttons work like a simple “on/off” switch. If you press the button when the system is on, it will turn off. If off, it will turn on. The Hot Water and Heating override buttons work independently. Neither affects the other system. These buttons work only when the MODE is set to Auto or Once (see page 7). This change is temporary. It does not change the daily programme schedule, which will r ...

The EXTRA HOUR buttons can extend the current “On” period for 1 to 3 hours more. For example, if you expect guests you may want heating or hot water on for longer than usual. You can also use these buttons to switch on the system for a short period of time. Press EXTRA HOUR once or more to extend times. These buttons work only when the MODE is set to Off, Auto or Once (see page 7). This change is temporary ...

The Holiday feature turns off your heating and hot water while you are away for an extended time (up to 99 days). After the designated time both systems resume normal operation. 1 With slider set to RUN, press the HOLIDAY button. 2 Press + or - to select the number of days you will be away (up to 99 days), then press OK to save and exit. The display shows the date you will return and counts down ...

10 (Schedule A) unless you change the settings. However, instead of changing the settings manually, you can choose either of 2 other pre-configured schedules. Schedule B keeps heating and hot water on longer if you’re often at home. Schedule C keeps heating and hot water off longer to reduce energy costs. • Adjustable time settings: By default, the Digi ...

14 System installation Heating/hot water systems Installation procedure 1 Disconnect electrical power 2 Install Digital Timer 3 Connect system wiring 4 Restore electrical power 5 Configure system operation 6 Test system operation NOTE: If you are not experienced in equipment installation and electrical wiring, we recommend that these procedures be done by a professional installer. DISCONNECT ELECTRIC POWER BEFORE INSTALLATION: Can ...

Use a screwdriver to loosen screws and separate the Digital Timer from the wall bracket as shown at left. Select a mounting location about 1.2 to 1.5 metres from the floor where the display can be seen clearly, in an area where the ambient temperature is between 0 and 40º C. Install the wall bracket as shown on page 16. Wallplate ...

16 Mounting options Use appropriate wood screws or anchor screws to mount the wall bracket flush against the wall. Use metal screws to mount on an existing junction box. Pull wiring through the wall bracket and connect to screw terminals as shown on page 17. 1 Make sure electrical power is off. 2 Install wall bracket as shown at left. 3 Connect system wiring as shown then replace Digital Timer on wall bracket and secure with screws. ...

Connect wiring from your heating and hot water system to the Digital Timer terminal screws as shown at left. See wiring diagrams on pages 18-20. 1 Make sure electrical power is off. 2 Strip insulation to expose about 7 mm of bare wire. 3 Use a screwdriver to loosen terminal screws, insert wires beneath terminal clamp, then tighten screws. 4 Replace Digital Timer on wall bracket, tighten securing screws, then restore electrical powe ...

18 Wiring diagrams Y-Plan S-Plan Note 1: This is a Class II device (i.e., double insulated). A parking terminal is available for earth wiring if required. Note 2: In “Y,” “S” and “W” wiring plans, connections are shown only for basic boilers. For connections to pump over- run boilers, consult boiler manufacturer’s instructions. Note 3: Gravity circulation hot-water systems should be fitted with a suitable hot-water cont ...

Note 1: This is a Class II device (i.e., double insulated). A parking terminal is available for earth wiring if required. Note 2: In “Y,” “S” and “W” wiring plans, connections are shown only for basic boilers. For connections to pump over- run boilers, consult boiler manufacturer’s instructions. Note 3: Gravity circulation hot-water systems should be fitted with a ...