Whispbar K102W Fitting Instructions Manual
Text of Whispbar K102W Fitting Instructions Manual
MAX kgs (lbs)
W/P
WHD
Isuzu
Double Cab , 4dr Ute 95-03
ZA
75 kgs (165 lbs)
75 kgs (165 lbs)
Pickup , 2dr Ute Mar 88-May 94
NZ
75 kgs (165 lbs)
75 kgs (165 lbs)
Holden
Rodeo Crew Cab, 4dr Ute Jul 88-Feb 98
AU
75 kgs (165 lbs)
75 kgs (165 lbs)
Rodeo Crew Cab, 4dr Ute Jul 93-Jan 03
NZ
75 kgs (165 lbs)
75 kgs (165 lbs)
Rodeo Double Cab, 4dr Ute Jul 98-Feb 03
AU
75 kgs (165 lbs)
75 kgs (165 lbs)
2
First Time Installation
G Remove parts from inside the package and
check. Contact your dealer if any parts are
missing or damaged.
G This kit fits type A, B, C and D.
G These instructions show type A crossbar
fitted. They also apply to type B, C and D.
NOTE: Clamp images in these instructions may
not be representative of the clamps in this kit
3
G Use keys to remove covers.
G Use hex screwdriver to reverse adjusting
screw 10 turns.
G Press adjusting screw and pull crossbar
legs out. Refer to the crossbar instructions
for crossbar adjustment method.
G Ensure each end of the crossbar is
adjusted equally.
4
G Remove locking screw.
G Apply protective strip as shown.
Trim if required.
G Attach clamp to each leg. NOTE; clamps
may have labels showing their positions on
the vehicle (For example; "Front Right").
5
G Refit locking screw so that it goes through
the hole in the clamp. Do not begin to
tighten the locking screw.
G Fit rubber pad (supplied with crossbar) to
foot.
G Make sure the pad fits into the holes
underneath the foot.
6
G Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 1/2") (unless otherwise stated).
G Clamps over rubber door frame mouldings.
G Please check the rear of this manual for
information relating specifically to your
vehicle.
G Adjust the legs on the crossbar so that they
are positioned equally from the ends of the
crossbar, and the clamps engage firmly on
the body work of the vehicle.
G Tighten a
G Tighten locking screw on both legs evenly.
G Check crossbar is securely attached to the
vehicle.
G Use keys to fit and lock covers
8