Waves JJP Drums Operation & User’s Manual
Text of the manual
TABLE OF CONTENTS
CHAPTER 1 – INTRODUCTION ..........................................................................3
1.1 WELCOME .....................................................................................................3
1.2 PRODUCT OVERVIEW......................................................................................3
1.4 A FEW WORDS
Chapter 1 – Introduction
1.1 Welcome
Thank you for choosing Waves! In order to get the most out of your Waves processor,
please take the time to read through this manual.
In conjunction, we also suggest that you become familiar with www.wavesupport.net.
There you will find an extensive Answer Base, the latest Tech Specs, detailed
Installation guides, new S
WaveShell technology enables us to split Waves processors into smaller plug-ins, which
we call components. Having a choice of components for a particular processor gives
you the flexibility to choose the configuration best suited to your material.
The Waves JJP Drums has several components:
•
JJP Drums Mono – Mono in to Mono out component
Chapter 2 – Quickstart Guide
•
Insert the JJP Drums plug-in on the track you wish to process.
•
Choose the Drum Type:
KICK IN – For main kick/bass drum tracks.
KICK OUT– If your kick was recorded using two microphones, use for the
mic positioned further away from the drum.
SNR TOP – For main snare track. If your snare was recorded using two
micro
Chapter 3 – Controls, Concepts, and Terminology
Types
The JJP Drums plug-in includes five Types to address a range of source materials:
Kick In, Kick Out, Snr Top, Snr Bot, and Toms.
Waves JJP Drums
User Guide
- 6 -
The Sensitivity LED’s 3 colors indicate when appropriate levels are reached:
o LED Off (too low)
o Green (good)
o Yellow (optimal)
o Red (very hot)
Turn the Sensitivity Control until the LED lights up. For best results, use the section of
your track with the highest peaks.
In most cases, the Sensitivity LED indicates that your levels hi
Center Section Faders
The Center Section faders represent auxiliary returns with additional processing, sent
from the main fader pre-fader. Above each fader, there is a dedicated mute button.
It may help to think of each plug-in as a mini-mixing console.
Please note: Certain faders may change, depending on the selected Type. This is
intentional, and represen
