Price Parc Node Recessed Channel Installation Manual
Text of the manual
Recessed Channel Installation Guide
1
v001 | Recessed Channel Installation Guide
NODE RECESSED CHANNEL INSTALLATION GUIDE
v001
© 2020 Price Industries Limited o/a PARC. All rights reserved.
TABLE OF CONTENTS
Product Overview ....................................................................................................................................
Recessed Channel Installation Guide
2
v001 | Recessed Channel Installation Guide
Product Overview
The Node Recessed Channel consists of two continuous side skirts, held together by a continuous Node face plate
to support the lighting and other Node devices, and intermittent supporting bridge plates. The recessed assembly is
designed to be installed in ceil
Recessed Channel Installation Guide
3
v001 | Recessed Channel Installation Guide
Site Conditions, Storage and Handling
• Read the Installation Guide before handling.
• Always wear appropriate hand protection when handling.
• Only store in clean, dry conditions.
• Do not over stack.
• Do not stack in a way likely to cause falls.
It is the responsi
Recessed Channel Installation Guide
4
v001 | Recessed Channel Installation Guide
Figure 2
Recessed Channel to Ceiling Panels
Before installing the Node Recessed Channel, ensure whenever possible, there is access to both sides. Support the Node
Recessed Channel mounting angles from the soffit at the required height for finished ceiling.
Figure 3
Node Recess
Recessed Channel Installation Guide
5
v001 | Recessed Channel Installation Guide
CHANNEL SEAM - NO GAP
LOOSEN SCREWS TO SLIDE THE ALIGNMENT BAR BY 1"
& TIGHTEN THE SCREWS ONCE THE BAR IS IN PLACE
DRIVE STYLE : HEX
DRIVE SIZE : 5/32"
(INSTALLATION BY OTHERS)
Connecting Node Channels
Roll pins are supplied which must first be knocked into place, then pressin
Recessed Channel Installation Guide
6
v001 | Recessed Channel Installation Guide
Figure 6
Figure 7
Figure 8
Figure 9
Node Integrated Sight Block
The sight block is included in any location where the Node Plenum is not installed. The sight block comes pre-installed
in the trough. The sight block can be trimmed on site to allow the passage of airflow below t
Recessed Channel Installation Guide
7
v001 | Recessed Channel Installation Guide
End Caps
Node Recessed Channel can be provided with or without end caps. End caps are factory installed as required.
Figure 10
Cutting Node Recessed Channels to Length
Where possible the channel should be ordered to length based upon contractor site measurements.
If the channe
Recessed Channel Installation Guide
8
v001 | Recessed Channel Installation Guide
Figure 11
The Node plenums can be placed anywhere along the length of the channel to coordinate with the services layout.
Node Recessed Channel Plenum Installation Sequence
Mount the plenum on top of the Node channel using the pre-drilled holes in the flanges.
Figure 12
118.11
Recessed Channel Installation Guide
9
v001 | Recessed Channel Installation Guide
Figure 13
The fully installed plenum and Node channels.
Figure 14
Recessed Channel with Weave Panel
Recessed Channel with Soft Cell Panel
T
LINEA
ANGUL
SUBMIT
NUMB
PROJEC
SUBMITTAL
DRAWIN
©
F
E
D
C
B
A
REV
A
B
C
D
E
CONSTR
- FLUSH
o AL
o AL
o ST
- RECE
o AL
o AL
FINISH:
- AL