Void Cyclone Bass Operation & User’s Manual
Text of the manual
©2022 Void Acoustics Research Ltd.
This user guide is subject to change without notice.
For the latest online version, visit: www.voidacoustics.com
Void Acoustics and the Void logo are registered trademarks of Void Acoustics
Research Ltd. in the United Kingdom, USA and other countries; all other Void
trademarks are the property of Void Acoustics Research Lt
UG10589-2.0 - Cyclone Bass User Guide V2.0
Page 3
Contents
1
Safety and Regulations
4
1.1
Important Safety Instructions
4
1.2
Limitations
4
1.3
EC Declaration of Conformity
4
1.4
UKCA Conformity
4
1.5
Warranty Statement
4
1.6
WEEE Directive
4
2
Unpacking and Checking
5
3
About
6
3.1
Welcome
6
3.2
Cyclone Bass Overview
6
3.3
Key Features
6
3.4
Cyclone Bass Sp
UG10589-2.0 - Cyclone Bass User Guide V2.0
1.1 Important safety instructions
The lightning flash with an arrowhead symbol
within an equilateral triangle is intended to alert the
user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to pers
UG10589-2.0 - Cyclone Bass User Guide V2.0
2 Unpacking and Checking
All Void Acoustics products are carefully manufactured and thoroughly tested before being
despatched. Your dealer will ensure that your Void products are in pristine condition before
being forwarded to you but mistakes and accidents can happen.
Before signing for your delivery:
•
In
UG10589-2.0 - Cyclone Bass User Guide V2.0
3 About
3.1 Welcome
Many thanks for purchasing this Void Acoustics Cyclone Series loudspeaker. We truly
appreciate your support. At Void, we design, manufacture and distribute advanced
professional audio systems for the installed and live sound market sectors. Like all Void
products, our highly skilled and ex
UG10589-2.0 - Cyclone Bass User Guide V2.0
3 About
3.4 Cyclone Bass specifications
Frequency response
40 Hz - 160 Hz -3 dB
Efficiency1
97 dB 1W/1m
Nominal impedance
8 Ω
Power handling2
600 W AES
Maximum output3
123 dB cont, 129 dB peak
Driver configuration
1 x 12”
Connectors
Phoenix connectors with link out
Height
370 mm (14.6”)
Width
490 mm (19.
UG10589-2.0 - Cyclone Bass User Guide V2.0
3 About
3.5 Cyclone Bass dimensions
Figure 3.2: Dimensions
UG10589-2.0 - Cyclone Bass User Guide V2.0
4 Cable and Wiring
4.1 Electrical safety
To avoid electrical hazards please note the following:
• Do not access the inside of any electrical equipment. Refer servicing to
Void-approved service agents.
4.2 Cable considerations for fixed installations
We recommend specifying installation-grade Low Smoke Zero
UG10589-2.0 - Cyclone Bass User Guide V2.0
4 Cable and Wiring
4.4 Cyclone glanded connector wiring
•
Remove both M6 bolts from the rear of the
connector plate
•
Undo the glanded connectors from the
rear of the connector plate and remove the
rubber plugs from the connectors.
•
Insert the cable through the glanded
connectors and tighten.
Figure 4