Powerfix Profi 96475 Operation And Safety Notes
Text of Powerfix Profi 96475 Operation And Safety Notes
Operation and Safety Notes
IMADŁO UNIWERSALNE
Wskazówki dotyczące obsługi i bezpieczeństwa
UNIVERZÁLIS SATU
Kezelési és biztonsági utalások
UNIVERZALNI PRIMEŽ
Navodila za upravljanje in varnostna opozorila
UNIVERSAL-SCHRAUBSTOCK
Bedienungs- und Sicherheitshinweise
DIY VICE
UNIVERZÁLNÍ SVĚRÁK
Pokyny pro obsluhu a bezpečnostní pokyny
UNIVERZÁLNY ZVERÁK
Pokyny pre obsluhu a bezpečnostné pokyny
Operation and Safety Notes
Page
4
PL
Wskazówki dotyczące obsługi i bezpieczeństwa
Strona
9
HU
Kezelési és biztonsági utalások
Oldal
15
SI
Navodila za upravljanje in varnostna opozorila
Stran
20
CZ
Pokyny pro obsluhu a bezpečnostní pokyny
Strana 25
SK
Pokyny pre obsluhu a bezpečnostné pokyny
Strana 30
DE / AT / CH
Bedienungs- und Sicherheitshinweise
Seite
35
Intended Use .................................................................... Page 5
Description of parts and features .................................... Page 5
Technical data .................................................................. Page 6
Included items .................................................................. Page 6
Safety advice ............................................................ Page 6
Fixing in place
The instructions for use are to be considered as part of the
product. They contain important information concerning
safety, use and disposal. Before using the product,
please familiarise yourself with all of the safety information and
instructions for use. The product must only be used as described
and for the stated fields of application. If you pass the product on
to third parties, please give them all of the documentation a
12 Hexagon socket screw key
13 Tube attachment
Technical data
Maximum jaw opening width:
approx. 50 mm
Length of jaws:
approx. 78 mm
Maximum bench top thickness: approx. 50 mm
Weight:
approx. 865 g
Dimensions height:
approx. 15.5 x 7.4 x 25.5 cm
(l x w x h)
Height from top of bench:
approx. 15.5 cm
Tube attachment:
ø approx. 38 - 43 mm
Max. tube weight:
2 kg
Max. tube length:
30 cm
Included items
1 Diy vice
1 Hexagon socket screw key
1 Tube attachm
Use the product on a stable, flat, undamaged surface (e.g.
a workbench).
Place circular workpieces in the vertical or horizontal V-groove
and clamp them tightly in place. By doing this you will prevent
the workpiece from slipping.
The vice is an aluminium injection casting and therefore is only
impact resistant to limited extent.
Do not use extension tubes on the tommy bars. There is the
danger of overloading (fracturing) the spindle.
Wear safety
Mounting the tube attachment
The tube attachment is intended for clamping tubes with a diameter
of 38 - 43 mm.
1. Release the hexagonal socket head screw 3 at the end of
the spindle using the supplied hexagon socket screw key 12.
2. Turn the vice jaws tommy bar 9 anticlockwise until the
spindle 10 is turned out of the rear jaw 2 .
3. Using the supplied hexagon socket screw key 12, release the
hexagonal socket head screw 8 on the underside of th