Trovan GR252 Quick Start

Firmware V1.0.4t Quick start GR252 The GR252 is a robust handheld scanner with a multi coil antenna to enable the best reading performance. The reader has a E ink display that has good readability even if used in direct sunlight. The Li-ion battery has a capacity of 2250mA and can be charged via the external IP65 connector using the acc ...

Firmware V1.0.4t Display: The E ink display is 2.9” (128×296 pixels) and is activated after pushing the button. Below a description of the Icons that are show in the top line of the display. scanning a tag Press the button briefly to put the reader in standby, it will optionally show the last code read (if activated via the PC compan ...

Firmware V1.0.4t In this case, the ID number is stored with date and time. The reader has not send the ID number via BLE to an external device. Connect via BLE to external device To link the GR252 via Bluetooth Low Energy (BLE) to a smartphone or tablet., double press the button in standby mode and the display will show it is connecting ...

Firmware V1.0.4t The display will inform the user that the transmission was successful or not. Charging battery The reader is delivered with a battery charger. Simply connect the circular connector to the connector on the back of the reader to start charging. The reader has an electronic charging circuit that monitors the battery. On th ...

Firmware V1.0.4t Software The via the PC wizard you can change the reader settings. The Wizard is self-explaining! Some of the options in the software wizard are: - Use custom names - Show last code after short button press - Shutdown time after reading a tag - Buzzer time - Tactile feedback - Save code (with date&time) - Etc, ...