Vision Hi-Tech VN100 Quick Installation Manual

Specifications

Brand:	Vision Hi-Tech
Category:	Digital Camera
Model:	VN100 (Quick Installation Manual)
File Type:	PDF
File Size:	—
Pages:	2

Download

Download Vision Hi-Tech VN100 PDF Manual (2 pages)

Read Online

Read the Vision Hi-Tech VN100 Quick Installation Manual online using the built-in PDF viewer.

Text of the manual

QUICK INSTALLATION GUIDE

Compact Night Vision Camera ◆ Special features Dear Customers! The lighting flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. INFORMATION CAUTION – To prevent electric shock and risk of the fire hazards This installation should be made by a qualified service person and should conform to all local codes. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the appliance. This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. WARNING Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. Do NOT use power source other than that specified. Do NOT expose this appliance to rain or moisture. By selecting this product, you have decided to use a professional device that guarantees highest quality and reliability. We would like to thank you very much for your confidence and kindly ask you to read the following instructions carefully before installation and operation in order to take full advantage of all quality features regarding this product. �� camera to be set up correctly and to have the best picture quality. �� application. �� according to local safety regulations. �� reusing. �� To avoid electric shock, never remove the screws or covers. There are no parts inside that need maintenance by the user. All maintenance should be carried out by qualified personnel. �� quality all the time. Be careful not to be stained by fingerprint. �� The sensor may go defective at this condition. �� shock during the process of transportation or handling. �� sensor. �� implied, including but not limited to, the implied warranties of merchantability,fitness �� This publication could include technical inaccuracies or typographical errors. Changes are added to the information herein, at any time, for the improvements of this publication and/or the corresponding product(s). �� replacement or reasonable maintenance of the product, for the cases, including but not limited to below: (1) Any damage and loss, including without limitation, direct or indirect, special, consequential or exemplary, arising out of or relating to the product; �� operation of the user; �� reason or cause including any failure or problem of the product; (5) Any problem, consequential inconvenience, or loss or damage, arising out of the system combined by the devices of third party. �� becomes public or is used for the purpose other than surveillance. � �� Wide range of Auto White Balance � �� 2D DNR / Dead pixel compensation 1. Precautions 2. Limitation of liability 3. Disclaimer of warranty 4. Package 5. Installation 5-1. How to install on the Wall / Ceiling manual x 1 Camera x 1 Tapping screws x 3 �� x 3 Tapping screws x 4 �� x 4 �� CAUTION CAUTION �� Standard Cable-through type bracket (Option: Cable-through type bracket) (Standard) (B) (A) �� QUICK INSTALLATION GUIDE Compact Night Vision Camera ◆ Special features � �� Wide range of Auto White Balance � �� 2D DNR / Dead pixel compensation Standard Cable-through type bracket �� Drill three screw holes on the wall / ceiling plate to fix three anchor (supplyed) in the holes. � Fix the plastic anchors in the holes. �� ④ Fix the mounting bracket by tightening the screws. ⑤�� tighen (A),(B) firmly. (A) (B) �� ※��D-WDR

Compact Night Vision Camera

1/3" HIGH RESOLUTION SUPER SENSITIVE CCD Standard Cable-through type bracket NTSC : 976(H)X494(V), PAL : 976(H)X582(V) NTSC 525 Lines PAL 625 Lines 2:1 Interlaced Synchronization 700TV Lines 0lux (1.5 lux at IR ON) 1.0 Vp-p / 75 ohm Internal AUTO More than 50db 3.6mm, 6mm board Lens ATW (2,500°K ~ 10,000°K) AUTO (COLOR, B/W) AUTO Dead Pixel Compensation DPC 20,000 hours -10°C ~ 50°C -20°C ~ 60°C MTBF Board Type : 90mA(IR OFF) /285mA(IR ON) UP to 20M at Moonless Night 12VDC Power Source 69.7 x 123.6 x 111.2 265g 69.7 x 178.5 x 79.4 400g Measurement (mm) Weight (Approx.g) Storage Temp. * Specifications are subject to change without prior notice for improvement. 140319-2 5. Installation 6. Troubleshooting 7. Dimension (mm) 8. Specification 7. Dimension (mm) If there are problems in operating, please refer to the checklist below. If the problem persists, please contact the agent where this product is purchased. Problems Troubleshooting �� 5-2. 3-Axis Adjustment PAN 360° ROTATE 360° TILT 90° 123.6 111.2 65 77.4 99 69.7 120° 120° Ø4.5 120° Ø50 Ø68 (A) (B) (C) PAN 360° ROTATE 360° Tilt bolt Rotation bolt Pan bolt TILT 180° 50 50 178.5 79.4 67.7 67.5 Ø5.2 69.7 144.6 47.6 �� Drill three screw holes on the wall / ceiling plate to fix three anchor (supplyed) in the holes. � Fix the plastic anchors in the holes. � Position the mounting bracket on the screw points. ④ Fix the mounting bracket by tightening the screws. ⑤ Slightly loosen bolt (A), (B) then adjust TILT(180°) and PAN(360°) of the camera using a serration on the bracket and tighten the bolts firmly. ⑥ Slightly loosen bolt (C) then adjust ROTATE(360°) of the camera and tighten the bolt firmly. (A) (B) (C) (Option: Cable-through type bracket) (Option: Cable-through type bracket) (Standard) (Standard) (Option: Cable-through type bracket)

Other Digital Camera Manuals