Wen MSA658T Instruction Manual

ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use your tool properly and for its intended purpose, you will enjoy years of safe, reliable service. NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: [email protected] 1-800-232-1195 (M-F 8AM-5PM CST) For replacement parts and the most up-to-date instruction manual ...

Specifications ................................................................................................... 3 SAFETY 4 General Safety Rules ........................................................................................ 4 Planer-Miter Saw Safety Warnings ................................................................... 6 BEFORE OPERATING 7 Unpacking & Packing List .................................................................................7 Know Your Planer-Miter Saw Stand ..................... ...

Tabletop Dimensions 22.7 in. x 22.7 in. Distance Between Support Arms 24.8 in. - 54.3 in. Shelf Capacity 55 lbs. (Evenly Distributed) Shelf Dimensions 22.5 in. x 16.5 in. Weight 58.8 lbs. INTRODUCTION Thanks for purchasing the WEN Planer-Miter Saw Stand. We know you are excited to put your tool to work, but first, please take a moment to read through the manual. Safe operation of this tool requires that you read and understand this operator’s manual and all the labels affixed to the tool. This manual provides information regarding poten ...

WORK AREA SAFETY 1. Keep work area clean and well lit. Cluttered or dark areas invite accidents. 2. Do not operate power tools in explosive atmo- spheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ig- nite the dust or fumes. 3. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. ELECTRICAL SAFETY 1. Power tool plugs must match the outlet. Never mod- ify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. 2. Avoid ...

7. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. POWER TOOL USE AND CARE 1. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. 2. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. 3. Disconnect the plug from the power source and/or the battery pack from the p ...

1. Place the planer stand on a flat and level surface to prevent rocking or tipping. 2. Do not climb, sit or stand on the stand. 3. Follow the assembly instructions carefully when in- stalling the stand. 4. This product is designed to be used as a stand for bench type power tools. Any misuse or abuse of the stand can result in product damage or personal injury. The tabletop will support weight up to 220 pounds and the shelf will support weight up to 55 pounds. Do not exceed the capacity of the stand. 4. The height of the power tool mounted to the stand should not exceed the width of the tool in order to pre- vent the sta ...

from the packaging and place it on a sturdy, flat surface. Make sure to take out all contents and accessories. Do not discard the packaging until everything is removed. Check the packing list below to make sure you have all of the parts and accessories. If any part is missing or broken, please contact customer service at 1-800-232-1195 (M-F 8-5 CST), or email [email protected]. PACKING LIST UNPACKING & PACKING LIST Components Tabletop (1) Roller Supports (2) Extension Arms (2) Legs (4) Shelf Brackets (2) Pedal Assem ...

TOOL PURPOSE Planer-miter saw stands give your planer, miter saw, and other benchtop tools the support, both physical and emo- tional, they deserve. Refer to the following diagrams to become familiarized with all the parts and controls of your planer-miter saw stand. The components will be referred to later in the manual for assembly and operation instruc- tions. PLANER-MITER STAND Roller Support Tabletop Shelf Base Height Adjustment Lock Knobs Extension Arm Foot Pedal Wheel 8 ...

INSTALLING THE LEGS 1. Place the tabletop on the floor, install one leg to a corner of the table top using four carriage bolts (Fig. 1 - 1), four M8 washers (Fig. 1 - 2) and four M8 hex nuts (Fig. 1 - 3). Repeat with all four legs. Be sure to only finger tighten the bolts to leave room for adjustments when attaching the base. INSTALLING THE EXTENSION ARMS 1. Insert the extension arms (Fig. 2 - 1) into the guide brackets on each side of the table top and secure each with a locking knob (Fig. 2 - 2). Add a self tapping screw (Fig. 2-3) to each extension arm to act as a stop. This will pre- vent e ...

INSTALLING THE PEDAL ASSEMBLY 1. Attach the pedal assembly (Fig. 4 - 1) to the base us- ing two partially threaded hex bolts (Fig. 4 - 2), two 8mm washers (Fig. 4 - 3) and two M8 hex nuts (Fig. 4 - 4). The wheel should be positioned inside the base assembly. What’s Needed: INSTALLING THE BASE 1. Attach the table top and leg assembly to the base. Se- cure each of the four corners with two carriage bolts (Fig. 3 - 1), four 8mm washers (Fig. 3 - 2) and four M8 hex nuts (Fig. 3 - 3). After setting the position, fully tighten all 24 bolts connecting the legs with the tabletop and the base assembly. NOTE: Determine i ...

INSTALLING THE SHELF 1. Attach the two support brackets (Fig. 5 - 1) onto the legs with four carriage bolts (Fig. 5 - 2), four 8mm washers (Fig. 5 - 3) and four M8 hex nuts (Fig. 5 - 4). Install shelf (Fig. 5 - 5) onto the support brackets using four carriage bolts, four 8mm washers, and four M8 hex nuts. INSTALLING THE ROLLER SUPPORTS 1. Place the roller supports (Fig. 6 - 1) into the guide brack- ets on the extension arms. Make sure that the roller sup- ports are assembled so that they line up with eachother. Secure each roller support with a locking knob. What’s Needed: Carriage Bolts (8) Washers (8) Hex ...

Now is the moment you’ve been waiting for. Unplug and bring over your favorite power tool. Make sure the weight does not exceed the stand capacity and the tool is wider than it is tall. Place the power tool on the center of the tabletop to maximize stability. Orient it so you will be operating the tool on the side perpendicular to the direction of the stand’s travel. Mount the power tool onto the stand using four M8x60 bolts (Fig. 7 - 1), four 8mm washers (Fig. 7 - 2), and four M8 hex nuts (Fig. 7 - 3). Check to make sure the tool is securely mounted and the stand is stable. WARNING! Only mount the power tool ...

No. Part No. Description Qty. 1 MSA658-001 Tabletop 1 2 MSA658-002 Leg 4 3 MSA658-003 Shelf 1 4 MSA658-004 Shelf Bracket 2 5 MSA658-005 Base Assembly 1 6 MSA658-006ASM Roller Support Assembly 2 7 MSA658-007ASM Extension Arm Assembly 2 8 MSA658-008ASM Pedal Assembly 1 9 MSA658-009 Guide Bracket 6 10 MSA658-010 Locking Knob 4 11 MSA658-011 M8x16 Carriage Bolt 32 12 MSA658-012 M8 Nut 38 13 MSA658-013 Ø8 Washer 38 14 MSA658-014 Foot 2 15 MSA658-015 M8x60 Hex Bolt 4 16 MSA658-016 Stationary Wheel 2 17 MSA658-017 M8 Hex Nut 3 18 MSA658-018 Pivot Wheel 1 19 MSA658-019 Spacer 2 20 MSA658-020 Ø8 Retaining Ring 2 21 MSA658-021 Shaft ...

commitment and our dedication to quality. LIMITED WARRANTY OF WEN PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship during personal use for a period of two (2) years used for professional or commercial use. Purchaser has 30 days from the date of purchase to report missing or damaged parts. SELLER’S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited Warranty and, to t ...