Sharp CD-BA3100 Service Manual
Text of Sharp CD-BA3100 Service Manual
– 1 –
CD-BA3100
No. S2111CDBA3100
CONTENTS
Page
IMPORTANT SERVICE NOTES (FOR U.S.A. ONLY)....................................................................................................... 2
SPECIFICATIONS ............................................................................................................................................................. 2
NAMES OF PARTS .....................................................................
– 2 –
FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER
TO THE OPERATION MANUAL.
Specifications for this model are subject to change without
prior notice.
SPECIFICATIONS
CD-BA3100
IMPORTANT SERVICE NOTES (FOR U.S.A. ONLY)
BEFORE RETURNING THE AUDIO PRODUCT
(Fire & Shock Hazard)
Before returning the audio product to the user, perform the
following safety checks.
1. Inspect all lead dress to make certain that leads are not
Sharp CD-BA3100 – 3 –
CD-BA3100
NAMES OF PARTS
CD-BA3100
I Front panel
1. Disc Trays
2. Timer Set Indicator
3. CD Direct Play Buttons
4. CD Eject Buttons
5. Memory/Set Button
6. Equalizer Mode Select Button
7. Volume Control
8. Extra Bass/Demo Mode Button
9. Tape 2 Record Pause Button
10. Tape 2 Cassette Compartment
11. Tape 1 Cassette Compartment
12. CD Track Down or Fast Reverse, Tape 2
Rewind, Tuner Preset Down Button
13. CD Track Up or Fast Forward, Tape 2
Fast Fo
– 4 –
I Remote control
01. Remote Control Transmitter
02. CD Direct Play Buttons
03. CD Pause Button
04. CD Memory Button
05. CD Track Down or Fast Reverse Button
06. CD Clear Button
07. Tape 1 Play Button
08. Tape 1/Tape 2 Stop Button
09. Equalizer Mode Select Button
10. Tape 2 Record Pause Button
11. CD Button
12. Tuner (Band) Button
13. Power On/Stand-by Button
14. Extra Bass Button
15. CD Stop Button
16. CD Play or Repeat Button
17. CD Tr
– 5 –
CD-BA3100
OPERATION MANUAL
To confirm the time display:
Press the CLOCK button.
The time display will appear for about 5 seconds.
Note:
The “CLOCK” or time will flash at the push of the CLOCK button when the AC power
supply is restored after a power failure or unplugging the unit.
Readjust the clock as follows.
To readjust the clock:
Perform “Setting the Clock” from the beginning.
If the time display is flashing, step 3 (for selecting the
– 6 –
Troubleshooting Chart
Many potential “problems” can be resolved by the owner without calling a service tech-
nician. If something is wrong with this product, check the following before calling your
authorized SHARP dealer or service center.
I Cassette deck
Symptom
G Cannot record.
G Cannot record tracks with proper
sound quality.
G Cannot erase completely.
G Sound skipping.
G Cannot hear treble.
G Sound fluctuation.
G Cannot remove
– 7 –
CD-BA3100
Accessories
Accesorios
FM/AM loop antenna × 1
Antena de cuadro de FM/AM × 1
Remote control × 1
Controlador remoto × 1
11
1
2
3
Battery Installation of the Remote Control
Instalación de las pilas del controlador remoto
Use 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar).
Batteries are not included.
Use dos pilas del tamaño “AA” (UM/SUM-3, R6, HP-7 o equivalentes).
Las pilas no están incluidas.
Remove the
Insert the b
– 8 –
Turning on Your System
Conexión de la alimentación de su sistema
44
The first time the unit is plugged,
the unit will enter the demonstra-
tion mode. You will see words
scroll.
Cuando se enchufe por primera vez
el aparato, se establecerá en el
modo de demostración. Verá un
desplazamiento de palabras.
1
2
Press the
X-BASS/DEMO
button to cancel
the demonstration
mode.
Pulse el botón
X-BASS/DEMO para
cancelar el modo de
demostración
– 9 –
CD-BA3100
1
Top Cabinet
1. Screw ..................... (A1) x5
9-1
2
Side Panel
1. Screw ..................... (B1) x8
9-1
(Left/Right)
2. Screw ..................... (B2) x2
3. Hook ....................... (B3) x2
3
Rear Panel with
1. Screw ..................... (C1) x2
9-2
Fan Motor
2. Screw ..................... (C2) x5
3. Screw ..................... (C3) x2
4. Socket .................... (C4) x1
4
CD Changer Unit
1. Socket ...................
– 10 –
Figure 10-1
Figure 10-2
Figure 10-3
1
Top Cabinet
1. Screw ................. (A1) x4
9-1
2
Side Panel
1. Screw ................. (B1) x8
9-1
(Left/Right)
2. Screw ................. (B2) x2
3. Hook ................... (B3) x2
3
Rear Panel with
1. Screw ................. (C1) x2
9-2
Fan Motor
2. Screw ................. (C2) x5
3. Screw ................. (C3) x2
4. Socket ................ (C4) x1
4
CD Changer Unit
1. Socket ..............
– 11 –
CD-BA3100
CP-BA3100
1
Side Panel/
1. Screw ..................... (A1) x4
11-1
Front Panel
2. Net.......................... (A2) x1
3. Catching Holder ..... (A3) x4
4. Screw ..................... (A4) x4
2
Subwoofer
1. Screw ..................... (B1) x4
11-2
3
Woofer
1. Screw ..................... (C1) x4
11-2
4
Tweeter
1. Screw ..................... (D1) x2
11-2
STEP
REMOVAL
PROCEDURE
FIGURE
Figure 11-1
(A1)x4
ø4x20mm
(A4)x2
ø4x20mm
(A3)x2
(A
Sharp CD-BA3100 – 12 –
REMOVING AND REINSTALLING THE MAIN PARTS
TAPE MECHANISM SECTION
Perform steps 1 to 4 and 7 of the disassembly method to
remove the tape mechanism. (See page 9.)
How to remove the record/playback and erase
heads (TAPE 2) (See Fig. 12-1)
1. When you remove the screws (A1) x 2 pcs., the recording/
playback head and three-dimensional head of the erasing
head can be removed.
How to remove the playback head (TAPE 1)
(See Fig. 12-2)
1. When
– 13 –
CD-BA3100
Figure 13-2
Figure 13-1
ADJUSTMENT
MECHANISM SECTION
• Driving Force Check
Torque Meter
Specified Value
Play: TW-2111
Tape 1: Over 80 g
Tape 2: Over 80 g
• Torque Check
Torque Meter
Tape 2
Play: TW-2111
30 to 80 g.cm
30 to 80 g.cm
Fast forward: TW-2231
—
70 to 180 g.cm
Rewind: TW-2231
—
70 to 180 g.cm
Specified Value
Tape 1
Specified
Value
Adjusting
Point
Instrument
Connection
Test Tape
Normal
MTT-111
Variable
3,000 ± 30 Hz
Sp
– 14 –
Test Stage
Frequency
Frequency
Display
Setting/
Adjusting
Parts
Instrument
Connection
CD SECTION
• AM IF/RF
Signal generator: 400 Hz, 30%, AM modulated
*1. Input: Antenna
Output: TP302
*2. Input: Antenna
Output: TP301
TUNER SECTION
fL: Low-range frequency
fH: High-range frequency
AM IF
450 kHz
1,720 kHz
T351
*1
AM Band
—
530 kHz
(fL): T306
*2
Coverage
1.1 ± 0.1 V
AM Tracking 990 kHz
990 kHz
(fL): T303
*1
*1. Input: Antenna
Output
– 15 –
CD-BA3100
TEST MODE
During POWER OFF mode, push below each 2 keys and [POWER] key. Then go to each Test Mode.
KEY
TEST MODE
CONTENTS
[CD] [X-BASS] + [POWER]
TEST 1
CD Test mode
[TAPE] [X-BASS] + [POWER]
TEST 2
Tape test mode
[TUNER] [X-BASS] + [POWER]
TEST 3
Tuner preset memory clear
[VIDEO/AUX] [X-BASS] + [POWER]
TEST 4
Tuner preset for production
[MEMORY/SET] [X-BASS] + [POWER]
TEST 5
All clear (reset)
[EQUALIZER] [X-BASS] + [POWER]
TEST 6
Aud
– 16 –
1. Motor assembly (x 2) mounting (screw x 4)
01/29
Fig.17
2. MT idle gear mounting (screw x 1)
25
Fig.17
3. MT system gear assembly
23/24/26/27
Fig.17
4. STB/tray drive system gear and others assembling/
37/38/45/46 (53)/47/48
Fig.17
mounting (screw x 3)
5. Tray big gear assembly
31
Fig.17
Gear positioning
6. T.M SW PWB mounting (screw x 3)
Fig.18
7. STB holder assembling
03
Fig.17
8. STB drive gear L/R assembly mounting (screw x 2
– 17 –
CD-BA3100
Figure 17
31
TRAY BIG GEAR
31
TRAY BIG GEAR
37
TRAY GEAR C
38
TRAY IDLER GEAR
37
TRAY GEAR C
38
TRAY IDLER GEAR
47
STB GEAR C
47
STB GEAR C
46
STB GEAR B
46
STB GEAR B
10
STB DRIVE GEAR A
29
01
MAIN BASE
29
23
23
24
25
26
27
Mark position
03
STB HOLDER
48
STB GEAR D
12
STB DRIVE GEAR R
(ASS'Y)
11
STB DRIVE GEAR L
(ASS'Y)
11(/12) (10)
STB DRIVE GEAR L(/R)
(ASS'Y)
10
STB DRIVE GEAR A
45
STB GEAR A
45
STB GEAR A
53
STB GEAR ANG.
53
STB G
Sharp CD-BA3100 – 18 –
31
M T SW PWB
33
TRAY
GEAR B
32
TRAY GEAR A
33
TRAY GEAR B
37
32
TRAY GEAR A
38
34
TRAY DRIVE GEAR R
36
TRAY JOINT GEAR R
47
46
34
TRAY DRIVE GEAR R
36
TRAY JOINT GEAR R
10
29
29
23
23
24
25
26
27
Mark position
11
45
TRAY BIG GEAR SET POSITION
33
32
Direct the recess part
(trapezoidal side) of the axis
35 in this direction.
* This position becomes the
reference (stock) position
of the tray.
These holes must align.
It must not ro
Sharp CD-BA3100 – 19 –
CD-BA3100
43
LIFT GEAR B
41
MODE BIG GEAR
33
32
04
CHANGE BOX R
47
46
28
MT IDLER GEAR F
10
Mark position
11
45
42
LIFT GEAR A
53
37
38
44
LIFT GEAR C
34
36
(A)
(B)
44
LIFT GEAR C
43
LIFT GEAR B
42
LIFT GEAR A
41
MODE BIG GEAR
Note:
(Assemble the mode big gear in this position.)
To assemble the mode
big gear, incline it,
bring it into contact with
the circumference and
put the center hole into
position since the
hatched part of the main
base is
– 20 –
43
44
41
33
32
47
46
28
10
Mark position
11
45
42
LIFT GEAR A
30
TRAY DRIVE GEAR F
35
TRAY JOINT GEAR F
35
TRAY JOINT GEAR F
02
CHANGE BOX L
*1
30
TRAY DRIVE GEAR F
40
LIFT CAM
40
LIFT CAM
30
TRAY DRIVE GEAR F
35
TRAY JOINT GEAR F
37°
*2
TRAY JOINT GEAR F
(CHANGE BOX L ASS'Y) ASSEMBLING POSITION
LIFT CAM
Direct the recess part (trapezoidal side)
of the axis 35 in this direction.
Assembling procedure
1. Turn the mode big gear approx. 3