Watchguard AP432 Hardware Manual
File Specifications
| Brand: | Watchguard |
| Category: | Wireless Access Point |
| Model: | AP432 (Hardware Manual), pr0vZW6RYEbaE |
| File Type: | |
| File Size: | — |
| Pages: | 29 pages |
Download PDF
Download Watchguard AP432 Manual (29 pages)Read Online:
Read the Watchguard AP432 Hardware Manual online using the built-in PDF viewer.
Key Pages of Document
Information in this guide is subject to change without notice. Companies, names, and data used in examples herein are fictitious unless otherwise noted. No part of this guide may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of WatchGuard Technologi ...
6 Access Point Management 6 About Your Hardware 7 Hardware Specifications 7 Environmental Requirements 8 Hardware Description 9 Bottom Panel Connections 9 Side Panel Connections 10 Device Indicators 10 Mount and Connect the Access Point 12 Ceiling Mount 12 Wall Mount 14 Wall or Ceiling Mount with T-Rail Mount and Spac ...
27 Taiwan NCC Statement 27 RoHS Statement 28 WEEE Statement 28 REACH Certificate of Compliance 28 WatchGuard Technologies, Inc. 5 ...
WatchGuard AP432 Hardware Guide The WatchGuard AP432 is a high performance 4x4 Wi-Fi 6 802.11ax access point that supports up to 1148 Mbps data rate on the 2.4 GHz band and 2400 Mbps on the 5 GHz band. The access point also features a 2.5G Ethernet interface. Power is provided by a PoE+ (Power over Ethernet) power source or a ...
Hardware Specifications Hardware Description Processor Qualcomm IPQ8072A Quad-Core CPU ARM Cortex A53 2.0GHz RAM n Flash: SPI 8MB n NAND: 256MB n RAM: DDR4 2GB Radio Model n 2.4 GHz: QCN5024 n 5 GHz: QCN5024 Radio Type and Frequency Band n Radio 1: 2.4 GHz 4x4 802.11b/g/n/ax n Radio 2: 5 GHz 4x4 802.11a/n/ac/ax Antennas n 4 x 2.4 GHz, 5.0 ...
Environmental Requirements To safely install your WatchGuard access point, we recommend that you: n Install the device indoors n Make sure the device has adequate clearance for air flow and cooling Other environmental requirements: Operating Temperature 0°C to 40°C (32°F to 104°F) Operating Humidity 5% to 90% non-condensin ...
Bottom Panel Connections Reset Button Resets the access point to factory-default settings. n Use a paper clip or other small object to press the reset button through the hole. n Press and hold the reset button for up to 10 seconds. When you release the reset button ...
Side Panel Connections Kensington Lock Slot The Kensington security lock slot is for use with a security cable to secure your device. Device Indicators The device has a single LED indicator that can show these conditions: WatchGuard Technologies, Inc. 10 ...
⚠️ Download Safety
The Wireless Access Point Hardware manual (29 pages) is completely safe to download (last scan date: 22/03/2026).