Warrior Products 1555 Installation Instructions

Text of Warrior Products 1555 Installation Instructions

11100 SW Industrial Way

Tualatin, OR 97062 Phone: (888) 220-6861 Fax: (503) 692-0364 [email protected] www.warriorproducts.com KIT CONTENTS: Item Qty Item Qty License Plate Mount 1 ¼ x 1” Button Head Screw 6 LED license plate light 1 ¼” Flat washer 12 Rubber edge trim 6 inches ¼” Nyloc nut 6 #6 x ½” black Torx screw 2 IMPORTANT INSTALLATION NOTES:  This Warrior Products license plate mount is designed specific

6. Place Rubber edge trim on the two edges of

the bottom angled contact surface as shown. You must cut the supplied rubber edge trim to size using a pair of diagonal cutters, or scissors. 7. Cut the rubber edge trim at an angle for a better appearance if you wish. 8. Discard the excess rubber edge trim. 9. Before attaching the license plate and mount to the bumper, first install just the BOTTOM Button Head screws with washers and Nyloc nuts to attach the

Warrior Products Automobile Accessories Owners Instructions: