Warn 106822 Installation Instructions Manual
Text of Warn 106822 Installation Instructions Manual
©2019 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
1
106859A0
WARN INDUSTRIES, INC. 12900 S.E. Capps Road,
Clackamas, OR USA 97015-8903, 1-503-722-1200, FAX: 1-503-722-3000
Customer Service: 1-800-543-9276
Dealer Locator Service: 1-800-910-1122
International Sales/Customer Service: 1-503-722-3008
International Fax: 1-503-722-3005
INSTALLATION INSTRUCTIONS
Winch Mount Bumper
Part Number: 106822
Application: 2020 Po
©2019 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc. 2
106859A0
Tools Required .................................................................. page 2
Parts List .............................................................................. page 3
Torque Specifications ..................................................... page 3
Installation ......................................................................page
©2019 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc. 3
106859A0
Please use the recommended torque specifications when assembling this product unless otherwise specified in the instructions.
FASTENER SIZE
FASTENER TORQUE
FASTENER SIZE
FASTENER TORQUE
lb-ft
(N.m)
lb-ft
(N.m)
1/4"
8
(11)
M4
(2)
3
5/16"
17
(23)
M5
(4.5)
6
3/8"
30
(40)
M6
(7.5)
10
7/16”
48
(66)
M8
(18)
25
1/2"
74
(100)
M10
(37)
50
9/16”
106
(144)
5/8"
©2019 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc. 4
106859A0
I N S T A L L A T I O N I N S T R U C T I O N S
1.
Remove the front bumper.
a.
First pull the plastic tube caps from the front of the
bumper.
NOTE: If you are changing from a Polaris winch to
a WARN winch bumper mount you will also need to
remove the hook and fairlead at this time.
b.
Remove the upper grille by depressing the two grille
tabs.
c.
Remov
©2019 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc. 5
106859A0
I N S T A L L A T I O N I N S T R U C T I O N S
3.
Remove the four push pull pin fasteners and remove the
front center plastic. Save hardware for later step.
4.
Install support mounting bracket (A2).
TIP: For this step, it may be more clear to refer to the
exploded view on page 3 for part A2.
a.
Position the bracket (A2) behind the sheet metal flange
©2019 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc. 6
106859A0
I N S T A L L A T I O N I N S T R U C T I O N S
5.
Attach the lower bumper bracket (A3) to the vehicle
using the M8 flange bolts (B4) and lock nuts (B3).
6.
Attach the upper bumper mount by placing over the
previously installed M10 bolts.
7.
Thread the supplied flange lock nuts (B5) on but do not
tighten yet.
8.
Continue installing, using two M12 hex he
©2019 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc. 7
106859A0
I N S T A L L A T I O N I N S T R U C T I O N S
Due to winch mount interference, you will need to
modify the front center plastic before reinstalling on the
vehicle.
9. Position front center plastic on vehicle. Mark where the
winch mount interferes with plastic. NOTE: Each vehicle
will be slightly different, image shown is one option.
10. With plas
©2019 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc. 8
106859A0
I N S T A L L A T I O N I N S T R U C T I O N S
13. Install fairlead to fairlead plate (A5) using hardware from
the winch kit.
14. Connect winch wiring cables to winch per winch
installation instructions.
15. Place fairlead plate/fairlead on top of the bumper, lining
up winch mounting holes.
16. Place the winch on top of the fairlead plate, aligning
mou
©2019 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc. 9
106859A0
I N S T A L L A T I O N I N S T R U C T I O N S
CARELESS INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY OR EQUIPMENT DAMAGE. READ AND UNDER-
STAND ALL SAFETY PRECAUTIONS AND OPERATING INSTRUCTIONS BEFORE INSTALLING AND OPERATING THIS PRODUCT.
M A I N T E N A N C E / C A R E
1.
Inspect all parts on the winch, winch mount, and related hardware