Pivot SURFACE PRO S Operation & User’s Manual
Text of the manual
Better Connection. Better Protection.
[ Issued 11.15.2021 Version R01 ]
USER GUIDE
SURFACE PRO S
For Microsoft Surface Pro 4 / 5 / 5 LTE / 6 / 7 / 7+
PIVOT sps
SURFACE PRO S | User Guide
For Microsoft Surface Pro 4 / 5 / 5 LTE / 6 / 7 / 7+
Your PIVOT case is designed to provide superior device protection while combining
functionality and aesthetics. Following the recommendations in this guide will ensure
maximum performance with proper use of the case.
WARNING: Before removing your device from your PIVOT case
The PIVOT Surface Pro S model (SPS) is compatible with multiple generations of the Microsoft
Surface Pro tablet. Before attempting to install your device, refer to the information below to
confirm compatibility. The PIVOT SPS supports the following devices:
Supported Devices:
Surface Pro 4
Surface Pro 5
Surface Pro 5 LTE
Align the device camera and buttons with the
corresponding access points in the case body and press
the corners of the device into the case beginning with
the camera and button area. The device will snap
securely into the case’s perimeter seal.
Installing Device
Beginning with the bottom edge near the
charging port, press firmly using your thumbs to
di
PIVOT SCREEN COVER
Installing The Screen Cover
To install the PIVOT Screen Cover, position the case and cover in landscape orientation, with the volume
and power buttons of the device in the upper left corner, as illustrated above with the device screen facing
you. Align the corners of the PIVOT case and Screen Cover and press to fit.
!
Pro Tip!
Place
Once the PIVOT Screen Cover and case body are properly aligned, with the corresponding access
points in the case body and cover aligned with the buttons of the device, press the corners of the
Screen Cover down onto the case body. The Screen Cover engages with the case body to hold firmly
in place by gripping the three locations illustrated above, as fo
Once open, adjust the angle of the PIVOT
Kickstand evenly on both sides to prevent
unnecessary wear. Do not bend or adjust
the left and right sides independently.
The PIVOT Kickstand is built into the
back of the case body. Please take
time to identify and become familiar
with the key features of the PIVOT
Kickstand before use
Adjust the viewing angle of the PIVOT
Kickstand by rotating the left and right
Legs of the kickstand evenly to the desired
position.
The PIVOT Kickstand Hinges provide a
preset resistance force, which supports a
range of viewing angles up to 120-degrees.
Do not force the kickstand beyond this
point to avoid damage.
Adjusting Viewing Angle
To use your devi