Ware Manufacturing 01509 Assembly Instructions

Text of Ware Manufacturing 01509 Assembly Instructions

C- Side Panels (2)

A- Lower Floor Panel PartS DeScriPtion: Revised 01/28/10 Fasten Side Panels (C) to Front Panel (D). Use 8- 2¼" Bolts and 8- Wing Nuts. Make Sure Door Faces Outward on Left Side and that the Hutch Slants to the Back. 16 - Wing nuts 6 - 1” Bolts 28 - 2¼” Bolts D- Front Panel E- Back Panel Pan F- roof Pan rails (2) STEP 1 STEP 2 all wire must face into the cage HD Townhouse Hutch Assembly Instructions (Item #01509) Install Pan Rails

Set Roof on top of Hutch.

Align Hinges and attach 4- 1" Bolts. Install “Stop Chain” as shown below using 1- 1" Bolt. Slide Pan into Hutch as shown. Slide Lower Floor into bottom of Hutch, wire side up. Slide Upper Floor as shown with wire side up. Attach Ramp with 1- 1" Bolt and 1- Washer. UPPER FLOOR Assembly is now complete! STEP 4 STEP 5 Tip: This item (as any wood) should be peri- odically (every 12 to 18 months depending on

Ware Manufacturing Garden Houses Owners Instructions: