Walker Edison AF4DRISA Assembly Instructions Manual

Text of Walker Edison AF4DRISA Assembly Instructions Manual

Please visit our website for the most current instructions, assembly tips, report damage,

or request parts. www.walkeredison.com Revised 29/10/2020(C) ® Walker Edison TM AF4DRISA Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved.

General Assembly Guidelines

I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. 2 1 III. Two people are recommended for ease in the assembly of this product. IV. The three main types of hardware used to assemble this product are: wood dowels, screws and bolts. V. The provided glue is to secure wood dowels in

Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved.

1 2 3 4 5 6 7 8 9 10 11 12 13 x 4 14 15 16 17 18 19 20 21 20 22 23 24 25 28 26 26 27

Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved.

Ø6x12mm Handle Cam bolt Ø4x38mm Screw Ø4x12mm S

The hardware quantities listed above are required for proper assembly.

Some extra hardware may also have been included. Philips head screwdriver required for assembly (not included) Y Glue tube X Drawer slider 4 sets * Note: This piece comes preassembled for shipping purposes and must be disassembled to complete the desk assembly. 10'' 2 pcs P.5 Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. Ø3x12mm Screw Z 6 p

Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved.

Disassembly diagram Assembly dragram S S Disassembly: Holding the bottom bracket and then push out bouncer from one side to other side, Assembly: Make sure the top of bouncer is aligned with the top of bottom bracket then press down bouncer to bottom bracket as per diagram.

Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved.

1 7 A A A B B B B B Z Z Z Z Z S S B B Z B A Insert wooden dowel (A) into part (7), and secure cam bolt (B) into part (1), then using screw (Z) attach Bouncer (B) to parts (1,7) with Philips head screwdriver as per diagram. Note: Please disassembly the Bouncer (S) follow up the step 1 as per diagram firstly before secure screw .

Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved.

5 6 4 2 A A A A A A A A A A A A A A A A A A A A B B B B B B B B Insert wooden dowel (A) into parts (2,4,5,6), and secure cam bolt (B) into parts (2,4) with Philips head screwdriver as per diagram.

Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved.

8 A A M M 3 3 A A B B B A A 11 Insert wooden dowel (A) into parts (3,8), and secure cam bolt (B) into part (3) and cam bolt (M) into part (11) with Philips head screwdriver as per diagram.

Walker Edison Indoor Furnishing Owners Instructions: