Verona VEGCT212FSS User Operating Instructions Manual

in the vicinity of this or any other appliance. ✓ WHAT TO DO IF YOU SMELL GAS: • Do not try to light any appliance. • Do not touch any electrical switch; do not use any phone in your building. • lmmediately call your gas supplier from a neighbor's phone. Follow the gas supplier's ...

product. The safety precautions and recommendations reported below are for your own safety and that of others. They will also provide a means by which to make full use of the features offered by your appliance. Please preserve this booklet carefully. It may be useful in future, ...

✓ After having unpacked the appliance, check to ensure that it is not damaged. If you have any doubts, do not use it and consult your supplier or a professionally qualified technician. ✓ Packing elements (i.e. plastic bags, polystyrene foam, nails, packing straps, etc.) should not be left around within easy rea ...

2. Rapid burner (R) - 10,000 BTU/hr CONTROL PANEL DESCRIPTION 3. Rapid burner (R) control knob (2) 4. Semirapid burner (SR) control knob (1) Note: - The electric gas-lighting device is incorporated into the knobs. - The appliance has a safety valve system fitted, the flow of gas will be stopped if and ...

� CHOICE OF BURNER (fig. 2.3) The symbols printed on the panel beside the gas knobs indicate the correspondence between the knob and the burner. The most suitable burner is to be chosen according to the diameter and volume capac- ity of the container to be warmed. It is important that the diameter of the p ...

because the humidity could infiltrate into the appliance making it dangerous. GENERAL RECOMANDATION ✓ Before you begin cleaning you must ensure that the hob is switched off. It is advisable to clean when the appliance is cold. ✓ All enamelled surfaces have to be washed with soapy water or some other non- abrasive product w ...

✓ These parts can be removed and cleaned with appropriate products. ✓ After cleaning, the burners and their flame distributors must be well dried and correctly replaced. ✓ It is very important to check that the burner flame distributor and the cap has been correctly positioned - failure to do so can cause serious problems. ✓ In th ...

Improper installation, adjustment, alteration, services, or maintenance can cause injury or property damage. Consult a qualified installer, service agent, or the gas supplier. INSTALLATION INSTRUCTIONS TOOLS NEEDED FOR INSTALLATION Screwdriver Wrench T-handle wrench Tape measure Angled h ...

absence of local codes, with the National Fuel Gas Code, ANSI Z223.1-Latest Edition. 2. Installation in manufactured (mobile) home: installation must conform with the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 [formerly the Federal Standard for Mo ...

10 min 11” 13/32 (290 mm) 30” (762 mm) 18” (457 mm) min 4” (102 mm) from cut-out max 13” (330 mm) min 11” 13/32 (290 mm) 30” (762 mm) 18” (457 mm) min 4” (102 mm) from cut-out max 13” (330 mm) Fig. 4.2 11” 21/64 (288 mm) 20” 1/16 (510 mm) 2” 23/64 (60 mm) 19” 9/32 (490 mm) 2” 23/64 (60 mm) 24” (610 mm) 10” 5/8 (270 mm) 20” ...