Total TPWLI20084 Manual 

instructions may result in electrical shock, fire, and/or serious injury. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. Note: Save all warnings and instructions for future reference. Due to our ongoing R&D&I program, the specifications in this document are subject to change without notice. 1) Work area safety a. Keep the work area well lit to prevent accidents. b. Do not use power tools in explosive atmospheres, such as in the presence of flammable liqu ...

objects, that can make a connection from one terminal to another. Shorting the battery terminals can cause burns or fire. d. Abusive conditions can cause expulsion of liquid from the battery; avoid contact. If accidentally contacted, rinse immediately with water. If the liquid comes into contact with the eyes, also seek medical help. Liquid expelled from the battery can cause irritation or burns. e. Do not use a battery or tool that is damaged or modified. They may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury. f. Do not expose a battery or tool to fire or excessive heat. Exposure to fire or tempe ...

thus a risk of injury to you. • Do not use it to clean windows. • Store the equipment in a dry place and out of the reach of children. Caution To avoid equipment damage and any possible personal injury resulting from this: • Do not work on damaged or incomplete equipment, or on equipment that has been converted without the manufacturer's approval. Before initial start-up, have a specialist check that the necessary electrical protection measures have been taken. • Do not use the device if important parts such as suction hose, nozzles or spray lance are damaged. � ...

Waste electrical products must not be disposed of with household waste. Please recycle at appropriate facilities. Check with your local authority or retailer for recycling advice. Security alert. Use only accessories supported by the manufacturer. The device is not suitable for connection to a drinking water supply system. Battery charge only below 40ºC. Always recycle batteries. Contains lithium ions. Do not expose the battery to fire. Do not expose the battery in the water. Noise level specification Lwa to dB. The device is not suitable for connection to a drinking water supply sys ...

some circumstances, interfere with active or passive medical implants. To reduce the risk of serious injury, we recommend that persons with medical implants consult their physician before using this power tool. The machine must not be damp and must not be used in a humid environment. Attention Safe operation of this machine is only possible when the operating or safety information is fully read and the instructions contained therein are strictly followed. Technical data Data sheet Voltage 20V Weight (incl. accessories/soap) 2.6kg Degree of protection PX0 Wo ...

2. Release button 3. Trigger 4. Water connection 5. Battery 6. Cleaning detergent container 7. Detergent container nozzle 8. Water supply connection hose 9. Spray lance nozzle 10. Spray lance 11. Mesh bag for transport 12. Charger 13. Lithium-Ion Battery Note: Not all accessories illustrated or described have to be included in the delivery. Note 2: This product is specifically designed to work with Total's range of batteries and chargers. Operation and commissioning Unpack Unpack carefully and check for completeness: • pressure washer • spray lance • suction hose • Mesh bag for transport • Detergent nozzle and container ...

through the integrated water suction function. This feature should only be used with a suction hose with a filter basket. Water supply connection Connection to the water connection (domestic) • Connect the supply hose to the water supply. • Purge the hose by allowing water to flow bubble-free out the other end of the supply hose. • Close the tap. • Connect the hose coupling of the supply hose to the water connection (4) of the pressure washer. Integrated water suction You can also use the device independently of the water pipe (eg with a container filled w ...

the connection is tight. • Press the release button (2) and then the switch or trigger lever (3). You can then release the release button (2). • Releasing the trigger (3) turns off the device. If there is a leak in the water system, turn off the device immediately and remove the battery. Risk of electric shock. Try reconnecting the water (see “Start-up: Connecting the water supply”). Finish the operation • After working with a detergent, rinse the machine with clean water. • Release the pressure washer switch (3). • Remove the battery from the dev ...

hose nozzles (8) dirty or clogged Rinse the nozzles (8/9) with water. If necessary, clean the nozzle hole with a needle. The device does not work The battery is discharged Charge the rechargeable battery. Leaks in the water system Connections not installed correctly Power off the device and remove the battery. Reconnect the device to the water supply. Connection pressure too high Only connect the device to a drinking water connection with a maximum pressure of 5 bar. Note: If they are not resolved after these checks, please contact an official To ...

solvents and can be damaged by their use. Use clean clothes to remove dirt, dust, oil, grease, etc. • Always store your tool in a dry place. Caveat Do not at any time allow brake fluids, gasoline, petroleum-based products, penetrating oils, etc., to come into contact with plastic parts. Chemicals can damage, weaken, or destroy plastic, which can result in serious personal injury and property damage. Storage • Completely empty the water from the cordless pressure washer. Disconnect the machine from the water supply. Turn on the cordless pressure washer for a few seconds ...