Sercomm RC8522 Operation & User’s Manual

CHAPTER 1 INTRODUCTION.............................................................................................. 1 Overview ............................................................................................................................ 1 Physical Details - WiFi IP Camera ................................................... ...

components and capabilities. Overview Congratulations on the purchase of your new WiFi IP Camera. The WiFi IP Camera is a Day/Night WiFi IP Camera with 1080p resolution and 802.11ac WiFi connectivity. With built- in White Light LEDs, the WiFi IP Camera can provide il ...

Front Panel Figure 1: Front Panel Light Sensor This is hardware sensor to detect LUX. Lens No physical adjustment is required or possible for the lens, but you should ensure that the lens cover remain clean. The image quality is degraded if the lens cover is dirty or smudged. Rear Panel Figure 2: Rear Panel Microphone The ...

to a 10/100BaseT hub or switch. Note:  Plugging in the RJ-45 USB cable will disable the Wireless interface. Only 1 interface can be active at any time.  The RJ-45 USB cable should only be connected or disconnected when the camera is powered OFF. Attaching or detaching the RJ-45 ...

missing, please contact your dealer immediately. . ...

IP Camera. System Requirements  To use the Wireless interface on the wireless model, other Wireless devices must be compliant with the IEEE802.11ac, IEEE802.11n, IEEE802.11a, IEEE802.11b or IEEE802.11g specifications. All Wireless stations must use compatibl ...

Wireless and LAN interfaces cannot be used simultaneously. Using the LAN interface is recommended for initial configuration. After the Wireless settings are correct, the Wireless interface can be used. The first time you connect to the camera, you should connect the RJ-45 USB cable and configure t ...