SENSIRION SDP31 Quick Start Manual
Text of the manual
Getting started with the Sensirion ControlCenter Software
• Run the ControlCenter Software.
• The sensor will be identified by the software automatically.
• 1 Select Config
to adjust sampling rates, temperature compensation mode
and displayed units.
• 2 Select Plot Settings
to adjust the graph configurations.
• Press Start to run a measurement
Thank you for your interest
in our differential pressure sensors.
Sensirion AG
Laubisrütistrasse 50 · 8712 Stäfa · Switzerland · phone +41 44 306 40 00 · [email protected]
www.sensirion.com