Phytec phyCORE MPC5676 Series Hardware Manual

phyCORE®-MPC5676/57xx Hardware Manual Document No.: L-807e.A1 SOM Prod. No.: KSP-0180-0 SOM PCB. No.: 2367.0 CB Prod. No.: KSP-0180-B0 CB PCB. No.: 2373.0 Edition: March 2015 ...

 PHYTEC Messtechnik GmbH 2015 L-807e.A1 Copyrighted products are not explicitly indicated in this manual. The absence of the trademark (, or ®) and copyright (©) symbols does not imply that a product is not protected. Additionally, registered patents and trademarks are similarly not expressly indicated in this ...

i List of Figures .................................................................................................. iii List of Tables ................................................................................................... iv Conventions, Abbreviations and Acronyms ......................... ...

ii  PHYTEC Messtechnik GmbH 2015 L-807e.A1 14 The phyCORE- MPC5676R on the phyCORE Carrier Board ......................................51 14.1 Concept of the phyCORE Carrier Board ............................................................. 51 14.2 Overview of the phyCORE Carrier Board Peripherals ................ ...

iii List of Figures Figure 1: Block Diagram of the phyCORE-MPC5676/57xx .................................................. 3 Figure 2: phyCORE-MPC5676/57xx Component Placement (top view) ................................. 4 Figure 3: phyCORE-MPC5676/57xx Component Placement (top view) ................... ...

iv  PHYTEC Messtechnik GmbH 2015 L-807e.A1 List of Tables Table 1: Signal Types used in this Manual ................................................................... vi Table 2: Abbreviations and Acronyms used in this Manual .............................................. vii Table 3: Pinout of the phyCORE-Connect ...

 PHYTEC Messtechnik GmbH 2015 L-807e.A1 v Conventions, Abbreviations and Acronyms This hardware manual describes the KSP-0180-0 System on Module in the following referred to as phyCORE®-MPC5676/57xx. The manual specifies the phyCORE®-MPC5676/57xx's design and function. Precise specifications for the Freescale ...

vi  PHYTEC Messtechnik GmbH 2015 L-807e.A1 Types of Signals Different types of signals are brought out at the phyCORE-Connector. The following table lists the abbreviations used to specify the type of a signal. Signal Type Description Abbr. Power Supply voltage input PWR_I Ref-Voltage Reference voltage output REF_O ...

 PHYTEC Messtechnik GmbH 2015 L-807e.A1 vii Abbreviations and Acronyms Many acronyms and abbreviations are used throughout this manual. Use the table below to navigate unfamiliar terms used in this document. Abbreviation Definition CB Carrier Board; used in reference to the phyCORE Development Kit Carrier Board. ...

viii  PHYTEC Messtechnik GmbH 2015 L-807e.A1 Preface As a member of PHYTEC's phyCORE® product family the phyCORE-MPC5676/57xx is one of a series of PHYTEC System on Modules (SOMs) that can be populated with different controllers and, hence, offers various functions and configurations. PHYTEC supports a variety of ...