Senect PS Manual 

An 44 – Nr. 11 76829 Landau / Deutschland Important note: Please read this manual carefully and store it so that you can use it later. Read the warning and safety notes attentive. Further information and latest software releases or documents can be downloaded from: www.senect.de www.produkte.senect.de © SENECT GmbH & C ...

Type description ..................................................................................................... 5 General safety instructions ........................................................................... ...

EPS-250-MA 2001 Sensor - Water level probe PS PS-300-MA 2002 Pressure sensor EDS 6 bar EDS-6000-MA 2003 Pressure sensor EDS 2.5 bar EDS-2500-MA 2004 Pressure sensor EDS 250 bar EDS-250B-MA 2100 Sensor - Oxygen O2S O2S-20-SC 2100-PP Sensor - Oxygen O2S PP housing O2S-20-SC-PP 2200 ...

The SENECT pressure sensor EDS is an electronic sensor unit for measuring the pressure in pipelines, hoses or vessels. As this is an electronic product, the usual requirements, as with all electrical appliances, must be met. The device may only be operated with compatible control units or control units approved by SENECT. The de ...

DANGER! Warning of life-threatening dangers. WARNING! Warning of possible life threatening and / or severe irreversible injuries. ATTENTION! Warning of possible medium or slight injury. ATTENTION! Follow the notes to avoid damage of equipment NOTE! Further information for the use of the device! ATTENTION! Warning of electrical shoc ...

measuring range, resolution and accuracy can be found in the following table. All SENECT® sensors are designed for the use in industrial aquaculture applications. Type: Measured value / Remark Measuring range Resolution EPS-250-MA Water level in tanks, sensor sc ...

Sensor type Delivered Items Conductivity Sensor CON 1 x Conductivity Sensor CON 1 x Manual Pressure Sensor EDS 1 x Pressure Sensor EDS incl. connection cable 1 x Manual Water level Sensor EPS 1 x Water level Sensor EPS 1 x Manual Oxygen Sensor O2S 1 x Oxygen Sensor O2S 1 x Manual ORP Sensor XT1 1 x ORP Sensor XT1 electronic interface 1 x ...

black silicone casing) which is clean, dry and protected from direct sunlight. Ensure that all cables are placed safely and all regulations are fulfilled. Mount the sensor so that the sensor head is permanently submerged. This can be achieved, for example, by attaching ...