Sel Arbiter Systems Manual
Text of the manual
Date Code 20160628
SEL Application Guide 2016-16
Application Guide
Volume VI
AG2016-16
Using an Arbiter Systems® Clock to Source
IRIG-B Time to SEL-3610, SEL-3620,
and SEL-3622 Devices
Ben Herrmann
INTRODUCTION
Arbiter Systems® (Arbiter) satellite clocks provide IRIG-B time signals to a variety of devices.
With the proper settings, the SEL-3610 Port Server
SEL Application Guide 2016-16
Date Code 20160628
the SEL device even if the Arbiter clock is set to send local IRIG-B time; these changes will send
during the IEEE 1344 extension of the time code. The SEL device will use the delivered UTC
time, so setting the Arbiter clock to send local IRIG-B time has no effect. To set up the SEL
devices for the time zone
Date Code 20160628
SEL Application Guide 2016-16
The device will deliver an IRIG sync successful message in the upper-left corner of the page.
After 5 seconds, refresh the page. The server time in the upper-right corner of the page should
now show the correct time, including the proper offsets.
CONCLUSION
This application guide describes a process for test
SEL Application Guide 2016-16
Date Code 20160628
© 2016 by Schweitzer Engineering Laboratories, Inc.
All rights reserved.
All brand or product names appearing in this document are the
trademark or registered trademark of their respective holders. No
SEL trademarks may be used without written permission.
SEL products appearing in this document may be cover